Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Sticky Stick: AAW FUNdamentals video

Posts

Sticky Stick: AAW FUNdamentals video

#1

Alan Zenreich

Sticky Stick: AAW FUNdamentals video

Alan Zenreich

I recently became a member of the AAW Woodturning FUNdamentals committee.

This video accompanies a short article I wrote for the May/June newsletter.

It's a simple enough accessory to build. I was having fun playing with some new audio recording equipment and video post production software.

http://vimeo.com/65065573


Re: Sticky Stick: AAW FUNdamentals video

#2

Re: Sticky Stick: AAW FUNdamentals video

david

This is a great idea! I like the portability aspect of the bar, because then I can take it away when I am producing shavings, which will get hung up on the bar and velcro.

Re: Sticky Stick: AAW FUNdamentals video

#3

Re: Sticky Stick: AAW FUNdamentals video

Barry Irby

I like it, but next you can make a Brushy Brush for cleaning the back of the sand paper so it will stick to the mandrel.

Re: Sticky Stick: AAW FUNdamentals video

#4

Re: Sticky Stick: AAW FUNdamentals video

John Lucas

Alan do you not have a problem with saw dust clinging to the Velcro and stopping it from working. I know that is a problem with the velcro on my jacket sleeves.

Re: Sticky Stick: AAW FUNdamentals video

#5

Alan Zenreich

Re: Sticky Stick: AAW FUNdamentals video

Alan Zenreich

John,

No I have not found it to be a problem.

It's a simple matter to pull the stick off of the lathe and give it a couple of taps... the dust shakes right out.

If anything becomes stubborn, I'd likely give it a shot of compressed air... but so far I haven't had to do it.

Of course, if the Velcro ever gets really funky, it's a 30 second job to peel up the Velcro and replace it with a new strip.