Engraving alternative (long)
david
This is a 19-inch calabash, one of the largest I've made; turned a couple of years ago. The name of the (elementary) school is where my son went and the principal of 35 years is retiring next month. I offered to donate this bowl in honor of the retiring principal. The school trustees proposed a memorial of sorts that would list the name of the 10 school principals since the founding in 1918. I offered to burn in the school logo on opposing sides with the space in between available for plaques to be applied for each principal and the dates of their tenure. After meeting with the trophy engraving store, it became apparent that engraving on a large, curved, object was an issue. The plaques they engraved on was a maximum of 4-5-inches wide. For curved objects they pounded the flat plate on a convex mandrel to achieve a semblance of the shape the plaque was to be applied to. The goal was to have the school name on one side, and the principal's on the other. It was a lot more effort, but I volunteered to burn the school name on one side. Letters were a Times font, 96 pt., largest available on my computer, and the size across was approximately 11-inches. I used a stick-n-burn film I got from Welburn Gourd Farms. The film is run through either a laser or ink-jet printer and the good feature is the film does not promote combustion. This is the second time I have done burned lettering and I learned that it helps to have a clean line on the outline of the letters; then fill in the black with a larger burning pen; in this case a 1/16 ball point. The guide lines were drawn with a grease pencil, which is easily removed with some paint thinner. Thinner is also used to clean up the adhesive that remains after the unburned film areas are peeled off. The burning was done after the bowl was wet-sanded with Waterlox; then Beal buffed. It had been previously sanded on the lathe and soaked in Watco Danish (natural) when done a while back.






