Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Don't turn crappy wood

Posts

Don't turn crappy wood

#1

Don't turn crappy wood

John Lucas

John Jordan once said, most cracks you see in wood were already there. You just didn't look close enough. I thought you might find this interesting. This is a piece of maple in my yard that is about a year old. Not planning on turning it of course. What I find interesting is if you went out to cut this wood after a rain it looks like the first photo. You might try to save some of it. That would be a huge mistake if you look at the second photo take 5 days apart after the rain stopped and wood began drying again.

Re: Don't turn crappy wood

#2

Chuck Jones - West TN

Yeah, but how far do the cracks go?

Chuck Jones - West TN

Might be if you cut off 3-4 inches you'd find solid wood again. Right?

Re: Don't turn crappy wood

#3

Steven Antonucci

Why I kill myself push log lengths into the truck

steven antonucci

Plenty of good wood in that still. Maybe not a cowboy hat sized piece, but still half of what is there could be used for something.

Nothing crappy about it, but it does need to be further processed.

Perspectives :)

S

Re: Don't turn crappy wood

#4

Re: Don't turn crappy wood

robo hippy

Yea, whack a couple of inches off it, and it should be fine. Biggest problem I have had with maple is that it goes soft in 6 or so months. Lots of sugar, and great for all those little things that turn good wood into compost. Also, fresh cut wood has much better color, as in brighter. Try it some time, cut one fresh, then one another 6 months to a year later and compare.

robo hippy

Re: Don't turn crappy wood

#5

Re: Yeah, but how far do the cracks go?

John Lucas

Chuck That log is only 12" or so deep and I'll bet the other side looks the same. That's what happens when you let someone else cut the wood.

Re: Don't turn crappy wood

#6

Re: Don't turn crappy wood

John Lucas

See my reply to chuck. This piece was short to begin with. Should have turned it the first week I got it but you know how life gets in the way.