Hi All, Working on a project for MBH. I need several rubber stoppers like I use when turning Salt Shakers. I had several extras left over from my pepper grinder kits and now need more. My local woodworkers store don't sell them separate. Any ideas where I can buy some; I need at least 6 each. I can't use cork stoppers because of the clearance. The brown rubber stoppers work great; and I don't want to admit to the "War Dept" that I can't find them.
Kelly - I'm not quite sure exactly what type of stopper yo are seeking, but my local (excellent independent) hardware store carries a variety of stoppers (both size and material).
Looking online I would be surprised if you could not find what you need at a scientific supply house. A number of both local and national options came up in my browser under the search term "scientific supply company." Of course for an inexpensive item like this the shipping/handling fees might seem very expensive!
Craft Supplies USA carries a "rubber bung" for use with salt shakers. The bungs fit a 1" diameter hole. Copy and paste the following link into your browser: http://www.woodturnerscatalog.com/p/4/-/12/54/-/5268/Turners-Select-Rubber-Bung/rubber+bung
I'm sure other turning supply houses carry a similar item.
Kelly, Have you tried your local Ace Hardware? The one's we have in Albuquerque have one long aisle full of those "specialty" parts drawers, down both sides. I always go there first.
Try searching for Chef Specialties and then search for pepper/salt mills or grinder kits. I believe they sell what you are looking for individually. That is if you are looking for the rubber plug or bung that goes in the bottom of a turned salt shaker-not a grinder/mill.
A while back I was making miniature salt and pepper sets (flat work) and was looking for something to plug a recessed hole in the bottom. I came across a company (http://www.caplugs.com) that sold all kinds of plastic caps and plugs. Helps that they will send you free samples. I needed a size to fit just right into a 7/8" dis. hole and had the right amount of tension to fit tight yet be able to remove by rocking back and forth. At the time, I thought they did the job. Trouble is, there is a minimum order, so I have a ton of them left over. Also may have some issues with the plastic deteriorating over time and becoming brittle. This was a while back, so don't recall all the details. Loss of brain cells, etc.