Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

OT: Walnut Chunks

Posts

OT: Walnut Chunks

#1

OT:  Walnut Chunks

Jim Breeden

Does anybody know where a person can find some large pieces of a dark wood like walnut for turning? Problem is; I have a customer who wants three salad bowls, each 16" dia x 8" deep, preferably out of some dark wood like walnut, etc. I think (?) I been to every site available looking, nothing that large.

Re: OT: Walnut Chunks

#2

Re: OT:  Walnut Chunks

Dale Miner

What part of the country?

Re: OT: Walnut Chunks

#3

Chuck Jones - West TN

Must be planning a big party...

Chuck Jones - West TN

...that's going to be a lot of salad. Going to be hard to find any bowl blanks already cut that thickness. Too much chance it will crack. Maybe you can find somebody with a huge walnut tree ready to cut, or ready to saw up.

I have bunches of black walnut stored in a hay barn. Most of it is that wide, but I think the thickest cants are about 5-6".

Re: OT: Walnut Chunks

#4

Brad Vietje

Re: Must be planning a big party...

Brad Vietje

I'm with Chuck -- those are some pretty darned big bowls.

Is your customer sure they really DO want 3 bowls this large? I made a fairly thick Spalted Grey Birch bowl of that size as a wedding present for my son and his wife, but there won't be many events when they will need a bowl that big.

Have you shown your customer a bowl of this size? Have they ever tried to fill one with salad, or even oranges? I find people think they want a massive bowl, but they end up actually using a smaller one. Even if they do want a 16" bowl, if it's 5" or 6" tall, like the wood Chuck has available, that's still pretty darned big.

Safe spinning,

Brad Vietje

Newbury, VT

Re: OT: Walnut Chunks

#5

Re: OT:  Walnut Chunks

Darrin Hill

www.turningblanks.net

Re: OT: Walnut Chunks

#6

Re: OT:  Walnut Chunks

Jorge

Jim,

I have a similar order, 4 sugar maple bowls on the 16" - 20" range 8" deep.

The mother passed away and her 5 sons want her bowl, so they need 4 more, with a similar look and feel.

This was 2 years ago and try as I may, have not got any luck. I did located one and when it arrived was all cracked.

Take a trip to a place where there are trees that big and buy a whole tree! or buy a piece of land with big trees on it.

Good luck!

Re: OT: Walnut Chunks

#7

Jim and Jorge - contact me

Dale Bonertz

Jim and Jorge,

Contact me, I may be able to help. If you can't send a personal message here then go to roughoutbowls.com and send one there.

Dale

Re: OT: Walnut Chunks

#8

Re: OT:  Walnut Chunks

Jim Breeden

Albuquerque.

Re: OT: Walnut Chunks

#9

Re: Must be planning a big party...

Jim Breeden

Brad: I kinda mentioned the same thing to the guy who wanted them. His wife is presently enrolled in a culinary arts school, and he wanted to surprise her with a "gift" when she graduates.

Re: OT: Walnut Chunks

#10

Ric Taylor

Have You Tried Woodbarter.com?


Re: OT: Walnut Chunks

#11

Re: OT:  Walnut Chunks

sam mcgarrity

make a segmented bowl

Re: OT: Walnut Chunks

#12

Re: OT:  Walnut Chunks

Jim Breeden

Ric : Went there first, no answer yet.

Sam: Thought about segmented - but - was worried it would delaminate by some type of oil being used. Maybe poly for protection? Or salad bowl finish - offer the same protection as poly?

Re: OT: Walnut Chunks

#13

Re: OT:  Walnut Chunks

Peter Hyde

Bowl from a board and epoxy for glue.

Re: OT: Walnut Chunks

#14

Re: OT:  Walnut Chunks

Jim Breeden

Board is what I've come down to - segmented. EPOXY, well duh ! Sometimes a person can't think of the obvious when, all that can be thought of is how to drain the swamp when your butt is covered in alligators. 8) AND, I can get a 6/4 x 16 x 10 plank of walnut cheap :b (relatively) here in Albuquerque.

Re: OT: Walnut Chunks

#15

Re: OT:  Walnut Chunks *LINK*

Peter Hyde

Jim here's a method used by Ted Robinson. He and I spent a while trying to get away from the usual cone shaped bowls that normally happen with bowl from a board. As you will see from this process it's possible to come up with some pretty nice curved sides instead of the cone.


http://forum.canadianwoodworking.com/showthread.php?18252-Segmented-Bowl-From-A-Single-Board-amp-Grain-Matching-Technique

Re: OT: Walnut Chunks

#16

Re: OT:  Walnut Chunks

Jim Breeden

Peter; I love that idea, and a beautiful piece I might add. Believe that's what I going to do. Thanks.