Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

chopping block

Posts

chopping block

#1

chopping block

Joe Herrmann


Here is a chopping block I made for a friend to give to his sister as a wedding gift. There is not much turning involved, except for the legs though. It's a good project and I've made more of these than I can count. It's about 11-1/2" square and about 5" high. There are 6 different species of wood in the block--can you name them all?

Re: chopping block

#2

Dennis in Southern Oregon

Re: chopping block

Dennis in Southern Oregon

Looks like ash, walnut and oak on the left face. I don't know what the orangeish wood is in the next layer.

Dennis

Re: chopping block

#3

Re: chopping block

Mark Trenier

Maple, beech, walnut and cherry?

Re: chopping block

#4

Mike Stafford

Re: chopping block

Mike Stafford

I've made a few chopping blocks similar to this but I did not turn the feet. I was not "into" the lathe in those days. I merely sawed and/or routed out the wood between the corners to form square feet. Yours are more elegant I must say.

My guess for the species is oak, ash, walnut, maple, cherry and osage orange. Maybe I got one or two right...... :D

Re: chopping block

#5

Re: chopping block

Joe Herrmann

Close Mike--you have one wrong...

Re: chopping block

#7

Don Leydens

Re: chopping block

Don Leydens

I love this so much! Nice and thick with a great design and choice of woods. Well done, Joe!

Re: chopping block

#8

Re: chopping block

Joe Herrmann

The front row, from the left is Sassafras, Walnut and Hard Maple.

The second row, from the left is White Ash, Cherry, and Red Oak.

It was interesting, when I blew the sanding dust off the block prior to finishing, the air went completely through the 2-1/4" thick oak pieces as did the walnut oil I used to finish the top. I had to wipe it off the bottom. the base of the block to the top chamfer is rattle can lacquer.

Re: chopping block

#9

Re: chopping block

david

Very nice block, Joe. Looks like it will be a treasured heirloom. Just a thought, though--the block if used on a regular kitchen counter would put the top surface just an inch below bar height; probably not the most comfortable working height except for a guy or relatively tall female.

Re: chopping block

#10

Re: chopping block

Joe Herrmann

I've never noticed a problem with ours nor have I gotten any complaints. However, my wife is relatively short--I'll ask her if it's a problem.