Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Bowls & Boxes

Posts

Bowls & Boxes

#1

Roger in MO

Bowls & Boxes

Roger in MO

Here are some bowls and boxes turned since Christmas

The large ash bowl is about 9" dia x 3" tall

The strait side ash bowl is about 6 x 2 1/2

The platter/bowl, also ash, 7 1/2 x 1 1/2

The elm burl box (?) is about 5x5. It was a Christmas present and I don't recall exact size.

The small box on the right is elm. That tree was cut last spring but seems dry and so far has not changed size or shape. Size is nominal 3x3

The other box is 2 1/2 D x 3 tall. It also is ash but has a hedge insert on the top. This box represents a whole bunch of "redesign opportunities" I started out by turning the wrong detail in the top. (thus the hedge insert). Then the skew decided to go off on a tangent which resulted is a body diameter reduction. Since the bottom detail on the top was already established the diameter of the top ended smaller than envisioned. The chunk of hedge was one from a dead stump that I cut maybe 5 or 6 years ago and has been in the shop since then. Yes, it was very hard!

Thanks for looking.


Re: Bowls & Boxes

#3

Roger in MO

Re: Pics?

Roger in MO

I'm not sure what is going on. When I looked at the post before posting it, all 4 pictures were there and looked fine.

Now there are 4 boxes with an x enclosed.

I don't know where the square with the 1-2-3 markings originated. It appears to relate to a three sided turning. Charlie is this yours?

I will try to repost later tonight, maybe breaking pics into two posts/

Any other ideas out there?

Re: Bowls & Boxes

#4

Roger in MO

Re: Bowls & Boxes

Roger in MO



This ash bowl is about 9" dia x 3".


This ash bowl is about 6 x 2 1/2

If these pics post, I'll post the others.

Re: Bowls & Boxes

#5

Roger in MO

Re: Bowls & Boxes

Roger in MO

Here are the other pictures.

This elm burl box is about 5x5. Rattle can lacquer.



This ash platter/bowl is about 7 1/2 x 1 1/2. mineral oil finish



The elm box is about 3 x 3.

The ash box is about 2 1/2 x 3 with a hedge insert on the top. As noted in the original post, several design opportunities were present on this box.

Sorry for the poor quality of the photos.

I'm still wondering what went wrong with the original post pictures.

Thanks for looking. Roger