Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Kiln drying walnut

Posts

Re: Kiln drying walnut

#26

Re: What I am going to try

Dale Bonertz

This I already do. I use a tenon and when you consider the depth of the tenon in with the bottom depth of the bowl you end up roughly that 10%. Lower in the transition area may be slightly thinner but it doesn't seem to make much difference. You'll also notice there is not much movement in the bottom of a bowl compared to the rim so you can get by with it being a bit thinner.

Re: Kiln drying walnut

#27

Re: Rounding Edges

Dale Bonertz

My jury is still out on the rounding over the edge. I definitely believe it won't hurt anything so why not except when coring it takes extra steps. However, I have dried a several thousand bowl blanks and have not noticed any concernable difference. When I hear Robo's point it makes sense but I am not sure it has ever been proven scientifically (listen to me since science tends to be corrected over time). I am a stubborn German so I need to find many things out for myself, I find it hard to just take someones word. :)

Re: Kiln drying walnut

#28

Re: What I am going to try

Don in Central Illinois

Bill Grumbine in his first DVD recommends this.