My experiences
Scott Crumpton
3+ years ago I got a good deal on 3 quarts of Minwax Antique Oil finish. I was still working on my current can so I put the new stuff on the shelf unopened. About half a year later I placed the three cans (in plastic bags) in a small fridge that I got for storing polyester resin. About a year ago I started using finish from one of the cans. I removed it from the fridge still in the bag to prevent condensation on the can and allowed it to come to room temp before opening. It was good as new at something like 2 years old. Decanted about a third into my working can. I then displaced the air with CO2, put the can in the plastic bag and back to the fridge it went. Decanted another third several months ago, still fine. And just recently made the fridge can my working can. It was a little darker than new, but not much. I've yet to open the other two cans, now well over 3 years old.
I always displace the air with CO2 before closing any can of oil based finish.
Things I've noted:
a) A partial can in the fridge will generate a partial vacuum and distort the can.
b) The older finish did seem to darken faster in my working can, but remains perfectly good.
c) Displacing the air in the working can slows the darkening process, but does not stop it.
I suspect that enough O2 remains in the can or gets dissolved in the finish when it's open to get the curing reaction going. Low temps will slow this reaction. The finish in my working can has never gone bad in my time frames, sometimes as long as 6 months.
I'm now just about ready to open the next of the original cans. It will be interesting to see how well it does after all this time.
---Scott.