Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Demos you'd like to see (again)

Posts

Demos you'd like to see (again)

#1

Aage Rendalen

Demos you'd like to see (again)

Aage Rendalen

I've not ascended to the august position of being responsible for the demos for the Richmond club. I'd love to have you help me out by listing the best demos you've seen.

And secondly, what would you personally love to see somebody demonstrate?

Re: Demos you'd like to see (again)

#2

Bill Blasic

Re: Demos you'd like to see (again)

Bill Blasic

Three of my favorites are Jimmy Clewes, Mike Mahoney and Richard Raffan. Another favorite is Sharon Doughtie. I never miss a chance to see these folks. A newer demonstrator that does a nice job is Joe Herrmann. Looking forward to seeing a few that I've not seen before this year (John Lucas, Cynthia and Michael Gibson). Every once in a while you hit a home run going to a demo. I looked in to Chris Pytlik's demo at the Albuquerque AAW Symposium and learned more in an hour + about using dyes than I learned in the two years that I was playing around with dyes.

Bill

Re: Demos you'd like to see (again)

#3

Re: Demos you'd like to see (again)

Jorge

Let's see, I've enjoyed very much demos by: Jimmy Clewes, Rolly Munroe, Michael Mocho, John Jordan and Beth Ireland. Also in a very special place Jean Francois Escoulene (hope did not butcher his name) multi axis turner, amazing!

In my wish list Glenn Lucas, Richard Raffan, Cindy Droza.

Re: Demos you'd like to see (again)

#4

Re: Demos you'd like to see (again)

Don Orr

I'v been licky to have seen LOTS of well-known turners do their thing in demonstrations. One of my most favorite is Michael Mocho. Just plain interesting and highly skilled-and funny. I watched all 3 of his sessions at Totally Turning a couple of years ago and wanted more. Very good!. I'd love to see Ray Key and Chris Stott again. Add to that list Jimmy Clewes, JFE, Jenn Shirley, Mark St.Leger, John Lucas, and many, many more. There are still many I have not seen and some of them are coming to Totally Turning this year like Mike Mahoney and Steve Sinner. I need to hit the lottery and retire.

Re: Demos you'd like to see (again)

#5

Re: Demos you'd like to see (again)

david

In the nearly 10 years that I have been a member of the Honolulu Woodturners, we have had only three that have been asked back: Graeme Priddle, Kip Christensen, and Mike Mahoney. Don Derry will be back this May for another. Demonstrators who stand out for me area: Jacques Vessery for his artistic talent; Jimmy Clewes for his professionalism, and audience connection with Trent Bosch and Mike Mahoney. Demonstrators who have impressed me with their preparation and focus on doing a good job are Kip and Evi Avisera. John Jordan will be here at the end of the month--looking forward to that. On my wish list: Stuart Batty and Art Liestman.

Re: Demos you'd like to see (again)

#6

Re: Demos you'd like to see (again)

Dick Coers

My two favorites, that we had at our club, were Matthew Hill and Mark Gardner.

I'm at a point that I don't want to see woodturning, I want to see creative work on the wood. Both these guys are very creative and plain down to earth folks. My kind of people to sit all day and listen to. No flash, no circus acts, just plain good ideas and techniques.

I suspect your club may be the same. Have the better club woodturners do the basic teaching, hire the creative folks.

Re: Demos you'd like to see (again)

#7

Re: Demos you'd like to see (again)

Mark Wollschlager

Any of the mentioned demonstrators would fill the bill.

In addition I would add:

Barbara Dill does a very good presentation of a neat but sort of hard to grasp technique. I have seen her demo 3 times and would again.

Alain Mailland is also a demonstrator that kept my attention.

Mark

Re: Demos you'd like to see (again)

#8

Re: Demos you'd like to see (again)

John Lucas

Mark StLeger and Nick Cook. Betty Scarpino, and Marilyn Campbell. Ed Kelley.

Re: Demos you'd like to see (again)

#9

Harry Robinette

Re: Demos you'd like to see (again)

Harry Robinette

I would say mine would be Stuart Batty technical genius, Jimmy Clews for making everything he does seam easy, Ray Key for he's mastery of tools.

Re: Demos you'd like to see (again)

#10

Bill Blasic

Re: Demos you'd like to see (again)

Bill Blasic

Darn I almost forgot another favorite - Doug Fisher. The man makes carving look like child's play but boy did I found out what he does is not easy. Also where would I be without mentioning Dale Nish and Dick Sing. You know there is a plethora of great demonstrators out there and I hope I get to see them all.

Bill

Re: Demos you'd like to see (again)

#11

Re: Demos you'd like to see (again)

John Lucas

Al Stirt is one of the best and most enjoyable.

Re: Demos you'd like to see (again)

#12

Donna Parrillo

Re: Demos you'd like to see (again)

Donna Parrillo

I'd like to see Michael Mocho demo again.

Re: Demos you'd like to see (again)

#13

Not as well known-but

John Lucas

Linda Suter and Dale Minor do excellent demos.

Re: Demos you'd like to see (again)

#14

Linda Suter will be

Cynthia Gibson

attending the TAW Symposium!

Re: Demos you'd like to see (again)

#15

Aage Rendalen

I've copied over your suggestions

Aage Rendalen

Thanks a lot!

Best advice: Use our club talent for instruction and get outside demonstrators for their creative insights.