Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Fluted Maple Box

Posts

Fluted Maple Box

#1

Bob Moffett

Fluted Maple Box

Bob Moffett

Spalted Maple side grain box with 12 flutes and texturing in the lid, inside of the box and bottom. I tried something new for me and made the flutes with a small (about ½”) sanding drum on a Dremel tool. I did the texturing with the small Sorby spiraling tool and a 3 point tool. I started this box before my wife went into the hospital, even had the finish on it but, had not buffed it. She got home last Friday night and Saturday I buffed and waxed it and gave it to her as a homecoming present. She is using it to store some rings in. The box is 3 1/4” wide, 2 ¼” tall to the top of the knob which is about ½” tall and 5/8” in diameter. It is about 3/16” thick at the bottom of the flutes. The finish is 3 coats of Minwax Antique Oil which a very good friend of mine told me about. I had to order it online because the big box stores don’t carry it and I never got around to going to all the paint stores in town. C&C welcome






Re: Fluted Maple Box

#2

Re: Fluted Maple Box

Lan Brady

Wow, The concave flutes are a head turner!

I cannot imagine the dust you created using a sanding disc for these.

The texture inside looks like you created a Mayan pocket calendar!

Nice Touch!

I am looking for the time that you and Dick Hines do a colaborative piece. These flutes and his tree lids will be a winner at the symposium!!!!!!!!

Lan

Re: Fluted Maple Box

#3

Brad Vietje

Beautiful Work, Bob!


Re: Fluted Maple Box

#4

Jim Barbour

Re: Fluted Maple Box

Jim Barbour

Nice work Bob. The only thing I see that might improve it is if the lid came down a bit thinner at the edge so it more nearly flowed into the box itself. But that may be more a matter of taste than style ;)

Re: Fluted Maple Box

#5

Mike Stafford

Re: Fluted Maple Box

Mike Stafford

The body of the box is magnificent. I have to agree with Jim that the lid would look better if it were somewhat domed and thinned down toward the outer edge so that the curve on top of the lid appeared to be somewhat of a continuation of the curve of the body.

Ideally the lid should be inset flush with the top and the flutes continued on the lid. Of course that would mean more work but heck you would be doing it. Easy for me to say, right?

Very nice piece!

Re: Fluted Maple Box

#6

Joe Bradshaw

Re: Fluted Maple Box

Joe Bradshaw

Very nice box, Bob. I agree with the others that the lid should be thinned down towards the edge, but, that's just my opinion. Glad to hear that Mrs. Bob is home. Should be a great Christmas for you both. Happy holidays.

Re: Fluted Maple Box

#7

Chuck Jones - West TN

Re: Fluted Maple Box

Chuck Jones - West TN

The box the others are describing sounds nice, but it would be a different box from this one. I like this one the way it is. Maybe that's why there are lots of different ways to do it.

Re: Fluted Maple Box

#8

Bob Moffett

Re: Fluted Maple Box

Bob Moffett

Thanks for the comments & suggestions guys. I'll certainly take them into consideration on the next one.

Re: Fluted Maple Box

#9

Don Leydens

Re: Fluted Maple Box

Don Leydens

Great work, Bob. I agree with the others, although it's a cool box as is. So glad the two of you will be together and at home for Christmas! Enjoy it!