Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Box Elder Spiraled Box

Posts

Box Elder Spiraled Box

#1

Bob Moffett

Box Elder Spiraled Box

Bob Moffett

Box Elder with carved spirals. The box is 3 ½” wide, 2 ¼” tall with a ¾” finial. The box is turned side grain using a Dremel tool which is a technique that I learned at John Campbell Folk School in Mike Stafford’s box turning class. If you ever get a chance to take his class, you should. He makes it more fun that you could imagine. The box has 12 spirals and texturing on the bottom of the box, inside the lid and on top of the lid. I kept the finial short since it was side grain rather than long grain. Any suggestions for a better design of the lid would be appreciated. I know the photography isn’t great but, I’m working on that. C&C welcomed.

Re: Box Elder Spiraled Box

#2

Mike Stafford

Re: Box Elder Spiraled Box

Mike Stafford

Bob, I like your box. However your statement "The box is turned side grain using a Dremel tool which is a technique that I learned at John Campbell Folk School in Mike Stafford’s box turning class" might be a bit misleading. I might have introduced you and some others in the class to turning side grain boxes but I certainly did not teach anyone to do it with a Dremel tool. I think you intended to say that the carving of the spirals was done with a Dremel tool.

Regardless, the box looks great and I agree with you, we have to continue to refine the lid design to complement your carving.

Re: Box Elder Spiraled Box

#3

Very Nice Bob


Re: Box Elder Spiraled Box

#5

elegant!


Re: Box Elder Spiraled Box

#6

Joe Bradshaw

Re: Box Elder Spiraled Box

Joe Bradshaw

Very nice box Bob. I think that I might have left the finial off and rounded the lid. However I would be glad to have it in my collection.

Re: Box Elder Spiraled Box

#7

Don Leydens

Re: Box Elder Spiraled Box

Don Leydens

I guess you see the top needs refining or you wouldn't have written it. I agree the sharp edges of the lid could be rounded a bit. Nonetheless, a beautiful piece!

Re: Box Elder Spiraled Box

#8

Bob Moffett

Re: Box Elder Spiraled Box

Bob Moffett

Mike, you are right, I turned the box sidegrain and thin used a Dremel tool to do the carving.

Re: Box Elder Spiraled Box

#9

Bob Moffett

Re: Box Elder Spiraled Box

Bob Moffett

Thanks Joe, that is a good suggestion.

Re: Box Elder Spiraled Box

#10

Bob Moffett

Re: Box Elder Spiraled Box

Bob Moffett

thanks Don. I like your suggestion. I'll try it on the next one.

Re: Box Elder Spiraled Box

#11

Very nice!

David Walser

Bob,

It's a very nice box and I would have been proud to turn it. As for suggestions for the lid, I think an "in fit lid" (with the tenon on the lid, not on the box) might give you more options. With an in fit lid you could make the top of the lid flush with the top of the box, making the lid all-but disappear. Or, you could carve the lid, making the spirals go from the base of the box to the base of the finial.

Just some thoughts. I'd have to sketch them to to see if I'd like either of these approaches more than what you did.

Re: Box Elder Spiraled Box

#12

Bob Moffett

Re: Very nice!

Bob Moffett

Thanks for the suggestion. I hadn't thought about an in fit lid. I like that idea.

Re: Box Elder Spiraled Box

#13

Mike Stafford

Re: Very nice!

Mike Stafford

An infitting lid might lend itself better to continuing the spiral carving all the way up to a handle on the lid. Might be a little more work for you Bob but heck you'll be doing the work..... :b :D

Re: Box Elder Spiraled Box

#14

Ditto Joe Bradshaw's comments!