Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Pricing

Posts

Pricing

#1

Pricing

Jeff Rich

Hello Folks!

I am needing a bit of advice....

I am taking an assortment of bowls to the gallery and I have a bit of an idea on pricing, however, I do not want to undercut or overprice.

For the large 14" Maple "Harvest Bowl" I am thinking ~~$175-$200

For a smaller 7" "Oil Dipping bowl" more in the range of $25-$45

Any suggestions?

I will include pictures of these 2 bowls.

Re: Pricing

#2

Rob Wallace

Need more info...

Rob Wallace

What's the commission?

Are these the full retail prices or the artist price?

What other market information do you have about similar pieces offered at other galleries?

You might also let us know where you are located; the markets will differ geographically.

Rob

Re: Pricing

#3

Chuck Jones - West TN

...and where is the gallery?


Re: Pricing

#4

Re: Need more info...

Jeff Rich

We are located in Central Indiana.

The Gallery is new and is located in Noblesville, just a bit north of Indianapolis.

This is the first place I have any of my works "out", other than the local craft markets.

The gallery is doing 20% commission, which I think is fairly standard.

I am very new to the pricing game.

Re: Pricing

#5

Re: Pricing

Jeff Rich

Nickel Plate Arts in Noblesville, Indiana.

New gallery.

Re: Pricing

#6

Rob Wallace

Re: Need more info...

Rob Wallace

Jeff:

I WISH 20% commission was standard, but a typical gallery commission usually is more like 40% for most galleries, and 50+% for high-end galleries in urban centers. You are lucky to be at 20%.

My opinion only - For a brand new gallery in a non-urban center (particularly in the mid-west) you may be a bit overpriced on the bigger piece and OK on the smaller, oil-dipping bowl. Both pieces are well done, but have no secondary embellishment or exotic woods which would warrant additional cost given more time, etc. investment by the artist. List them at the prices you have noted, and produce a range of other work of different prices and sizes.

You will need to make a name for your work, particularly when the gallery is this new and building its own reputation. Much of setting the price is determined by what the market will bear both in geography, economic base, and local commitment by art enthusiasts to purchasing local work. Once you and the gallery become better established locally, I suspect the commission rate will go up from 20%.

I sell most of my work in Iowa, and over the past 8 or 9 years have been selling pieces fairly regularly throughout the year at what have been described as "fair" prices. I have been told that if I sold my work "on the coasts" or in "big cities" like Chicago or St. Louis, I could be getting 2 or 3 times what I am getting now; a lot has to do with the geography, the economy and discretionary income, and the level of support in the region for local artwork and artists. Some have even given a baseline price of $ 10/inch diameter for basic utilitarian bowls, but even this might be considered a vague starting point.

You may want to experiment with a range of different sizes, forms, species, and prices to see what sells in your region. There also are major differences in price expectations for 'artform' pieces versus utilitarian pieces like salad bowls, etc. Much of this will need to come from experimentation with the gallery and its clientele, particularly since your gallery is new and has no track record of sales or clients. Go to other galleries in the region and do your own research on prices for turned wooden items being sold there, and assume a 40% commission at these places to see what others are asking for their work. Be prepared to make price adjustments, but don't undersell your work.

There have been a number of articles published on pricing one's work. The latest edition of Woodturning Design also has some great tips from Ruth Niles on marketing and selling.

Good luck with your sales!

Rob Wallace

Re: Pricing

#7

Re: Pricing

jim 9 miles

Rob gives you some good advice above. If you want it to sell you have to set a price ( and have a product ) that sells in your particular market. It really does not matter how much time you put into it, how much the wood cost etc.- It is how much a customer is willing to pay. The advice I would offer is this: We ( woodturners ) tend to be experts at making our work and very poor at selling it. The gallery is in the sales business. Ask their advice on pricing. ( You said it is a new gallery ) but assuming the folks there have some local experience, use their knowledge to not only set prices, but to help you learn what types of work sells. You have to learn to make what sells, not to sell what you like to make. It is a learning experience, ( like learning to turn ) try something and if it dosen't work try something different. Good luck !

Re: Pricing

#8

Re: Pricing

Dick Coers

Harvest bowl in my area would be priced at something like $125, if I could sell them. The only bowls that have been selling lately, are natural edge, or bigger than 16".

Re: Pricing

#9

Re: Pricing

Jeff Rich

The oil dipping bowls seem to be selling best for me at the moment.

I am actually taking a small, medium and large bowl to the gallery with a few goblets.

I have been told I should sell the goblets for about 3 times what I do at craft shows....however, I do not think the market will bear a $75 goblet.

Re: Pricing

#10

Re: Pricing

don stephan

The gallery likely will want you to sell in your shop and at shows at the gallery price so they are not undersold.