The tree that I cut this piece from was about 8" in diameter. The tree had been broken and this was a large circle of wood about 18" in diameter and about 12" with the trunk coming in straight up into it and then going out of the piece at a 90 degree angle. The bowl is 18" in diameter 6" high and about 1/2" thick.
It was strange. The tree trunk came into the circle and was about 8" and then there was a big round section that was about 12" thick sort of like a burl cap except it didn't have the burl grain. It appeared that the tree had been broken at that point but continued to grow. The rest of the tree grew out of that circle at a 90 degree angle. I should have taken a picture of the tree. I have never seen another tree like it. I hope this makes sense.
Bob, that's very beautiful. I can see those feather featuers form the stress of that branch over the circle. it's very nice bowl. You know what would make it nice if you could share a piece of it on a drawing basis with rest of us.
That looks like what I have heard called an "onion burl" because of the way it shows layers. I have one here that I just roughed out last weekend from an Alder tree and the onion type is the only kind I've seen on Alders. I'm not absolutely sure but maybe not all types of trees produce the "pin burl" type of burl growing on the side of the trunk that we normally think of, with the swirls and pins. From your description, it seems that your broken tree produced a tumour as it healed that resulted in the onion type of burl. I've seen things similar in the woods on broken trees but not in that scale. You have a beautiful and truly unique piece.