Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Ambrosia Maple

Posts

Ambrosia Maple

#1

Dan Jechura

Ambrosia Maple

Dan Jechura

I received a truck load of Maple in the spring and stacked and painted the ends till I could get to them. I did cut and turn three bowls and they turn out great. The Ambrosia markings where dark. I turned them end grain. Now two days ago I cut another log up to make three more bowls. The Ambrosia markings have lightened up until all you can see is the out lines. I checked more of the logs with the same effect. Is this normal? I can post pictures when I get home tonight.

Dan J.

Re: Ambrosia Maple

#2

Chuck Jones - West TN

a wild guess...

Chuck Jones - West TN

...until a more scientific answer comes along. Could be that parts of the log was invaded by the ambrosia beetle at different times. The fungus in the older invasions might be more developed than in the newer spots.

Re: Ambrosia Maple

#3

Moisture in the maple and markings......

JamieDonaldson

...makes them appear darker, and they lighten as they dry. Ambrosia markings in wet red maple are darker than the surrounding light colored wood, but as the maple dries it often turns darker as well, reducing the contrast between the marks and surrounding wood. I often try to turn Ambrosia red maple while fresh to maintain the contrast between marks and whiter wood. Here is an example of red maple that has started to dry, and the white wood has started to turn darker in places.

Re: Ambrosia Maple

#4

Dan Jechura

Re: Moisture in the maple and markings......

Dan Jechura

can you add moisture to the wood to get it dark again?

Re: Ambrosia Maple

#5

Adding back moisture wouldn't gain..

JamieDonaldson

..much, as the wood will then dry out again, and probably begin to rot as well! Walnut does the same thing, when fresh cut the sapwood is white, then turns brown as it dries. >(