Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Need your advise to proceed

Posts

Re: Need your advise to proceed

#26

Re: Users beware, as these cracks are not......

phillip medghalchi

Jaime, I didn't say they healed, they started to come together as the piece dried up and then I put thick CA glue with the appropriate dust and shaving form the same site which is sap wood on one crack and the heart wood dust on the other crack then kept it packed again in the wood shavings. We will see how it comes out while I go for hollowing.

Re: Need your advise to proceed

#27

Keith Tompkins

Re: Users beware, as these cracks are not......

Keith Tompkins

Jamie, I have to agree with you. It's not worth it. No disrespect meant to Phillip or anyone else, but why take a chance on the piece flying apart, and besides, these cracked pieces look (my opinion) just awful. When one of my pieces crack, I cut it up, and toss it in the wood stove. Lots of good wood out there.

Re: Need your advise to proceed

#28

It grows on trees, throw it


Re: Need your advise to proceed

#29

Re: Users beware, as these cracks are not......

John Lucas

I agree with both of them. CA is brittle and can pop loose with the slightest catch. I know I "saved" a lot of pieces early on but eventually threw them away anyway. No matter how you patch it it's still a cracked bowl. I have seen some good saves over the years but without a doubt the best pieces were always crack free.

Re: Need your advise to proceed

#30

Re: Users beware, as these cracks are not......

walta

I say don’t risk your life turning wood so badly flawed.

Sand it, carve it, drill it full of holes but this piece of wood should never again see the lathe.

I can see its appeal and that what makes it so dangerous.

Tape is not enough to save your face.

If you like the effect, please start over with very fresh maple and make the wall less than a ¼ inch thick.

Walta

Re: Need your advise to proceed

#31

top view tells the story

Dick Coers

That piece is ready to be two pieces, REAL SOON!!!!That thing is firewood for sure. You have read Lynne Yamaguchi's blog right? Think that hollow vessel is worth half your face? I wouldn't turn it at 10 rpm after reading about all the surgeries and pain.

Re: Need your advise to proceed

#32

Re: Users beware, as these cracks are not......

phillip medghalchi

I have taken in all advises to heart thank you.

Re: Need your advise to proceed

#33

Re: Users beware, as these cracks are not......

walta

Edit

Tape is not always enough to save your face.

Re: Need your advise to proceed

#34

Keith Tompkins

Re: Users beware, as these cracks are not......

Keith Tompkins

Good for you, Phillip! That thing could come apart at any visible crack...live to turn another day :)

Re: Need your advise to proceed

#35

Re: Need your advise to proceed

Barry L Elder

Phillip, I hope you take the advice of most of these vastly experienced turners and put this piece down. Put it on your "history" shelf for future reference. I have experimented with various woods and various types of cracks and cures and have been extremely lucky! Now I use common sense, like no more golfing in thunderstorms, no more swimming with feeding sharks, etc., and especially, no more turning wood with the pith in it! Good Luck in the future!

Re: Need your advise to proceed

#36

Lyle Jamieson

No driving in a blinding snow storm

Lyle Jamieson

Thanks Barry, for telling it like it is. Many have tried to give this guy a hint but he is bound and determined to hurt himself.

Re: Need your advise to proceed

#37

Brad Vietje

Re: Users beware, as these cracks are not......

Brad Vietje

OR,

Carve it to highlight the flaws, add some cool texture and carving, and have some fun, but DON'T put it back on the lathe.

Safe spinning,

Brad Vietje

Newbury, VT