Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Six Weeks w No Lathe

Posts

Six Weeks w No Lathe

#1

Six Weeks w No Lathe

charlie belden

I thought, when the bearings on my little JET gave out, I'd go into turning withdrawl during the 5 to 7 Working Days to get the parts after ordering them.

Did you know that there are a ton of interesting things to do other than turning - like designing and making a portable video set up for turning demonstrations? There are friends to visit, places to go and things to see and do - that have nothing to do with turning? Did you know that Flux Core Arc Welding isn't as easy as it may seem - or that laser engravers are fun to play with? Who knew there was so much cool stuff at giant flea markets, especially here in Silly Cone Valley, or that CSS3 has a steap learning curve?

I just may finally get around to building a set of shelves and cabinets for my hallway, that I've been meaning to do since just before I got my JET Mini VS.

Oh, and driving up the Hwy 1 along the coast line in a little convertible Miata, on a nice sunny day, with a decent car stereo, is quite enjoyable.

What's the longest YOU'VE gone without turning something - and were there withdrawl symptoms?

Re: Six Weeks w No Lathe

#2

Steven Antonucci

no withdrwal, but rust

Steven Antonucci

I liken it to riding a bicycle.

I used to race competitively. I would think nothing of blasting down a hill at 45mph or making a tight turn at speed. Nowadays, I struggle to keep the bike from falling over. It's not that I have forgotten how to ride a bike, but my muscle memory has been erased.

Same for dribbling a basketball. I went from a 2 guard to an uncoordinated idiot who can't even dribble in place.

I usually take it pretty lightly in the summers because the shop can be hot, and the mosquitoes vicious. I may only turn a day a week for an hour or two, and perhaps one or two "full days" per month. In between, I carve, explore Youtube for new things to learn, and generally just try to stay semi-active. Being in the shop is my most prolific form of exercise these days.

While there is no withdrawal, I find my beads get pretty poor, but it is a small price to pay. Pretty soon, I will have finished the chain maille shirt I have been working on for the past year. It has decidedly taken many hours away from turning, but it also has a much smaller clean-up and can be done while sitting on the couch amongst the family.

Steve

Re: Six Weeks w No Lathe

#3

Four Months

Mark Mandell - Gone Round In New Jersey

Between the time I sold my 1236 and 3 days after my Stubby 1000 arrived from Australia.

Re: Six Weeks w No Lathe

#4

Re: Four Months

Mike from St. Clair Shores

I had my hip replaced on Nov. 17, 2011. Then on Dec. 17, 2011 my wife(of 39 years) died in her sleep from a heart attack, at 59 there were no previous symptoms. I have been trying to get the house ready to sell and haven't turned a thing in over 9 months. My shop is 17 miles from my home and after 8 years of turning every day, I have only been to the shop about 5 times to get some tools I needed at home. I'm still not sure I will ever start turning again. Life sure can deal some pretty good punches.

Re: Six Weeks w No Lathe

#5

Re: Six Weeks w No Lathe

Tom in Alaska

The power has been out here for two days. I'm getting itchy.... I can sure do without the TV and all that jabberin', I can grill on the back deck for food, but I NEED my lathe ... tick .. tick .. tick

Re: Six Weeks w No Lathe

#6

Re: Six Weeks w No Lathe

bill Crommett

I walked pass my lathes for two months while recovering from a heart attack but Tuesday I decided to restart small and put a branch of Beechwood on the lathe and proceeded to turn a funnel . Back to the practice pieces !

Re: Six Weeks w No Lathe

#7

Steve Kubien

Re: no withdrwal, but rust

Steve Kubien

Steve, you've mentioned to chain maille shirt before but I cannot remember why you are making it. Just general interest or a more practical use like reenactments?

Re: Six Weeks w No Lathe

#8

Steven Antonucci

I am making it just because...

Steven Antonucci

I was at Maker Faire last year sitting in this building:

waiting for ArcAttack to start their show (in progress in the picture). Playing Toccata and Fugue with electrical arcs... insane.

While waiting, and glad to be out of the heat, my son and I noticed a guy sitting next to us wearing a chain maille shirt. He also had a bag with a cube in it. The whole day, my son and I were kidding back and forth about how cool it was and how we'd make one. When we got in the car for the ride home, we realized that it was pretty much not a joke, and that we'd try it.

I make the jump rings on the lathe with a mandrel that spins to make a long coil, which I then clip into the individual rings. I suppose in some bizzarro universe, I will call this a turning project.

I posted this picture a few weeks ago on FaceBook, but the shirt is a little bit further along. The front is now a V-neck, and I will probably have 2 short sleeves on it before the end of the month. In the end, it will be a long sleeve shirt, and potentially hooded (The hair pulling will be epic). As it sits in this picture, it weighs 16#.


I might ask Lyle to turn me a torso to display it on. Want to collaborate, Lyle? ;)

Steve