Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Gun lamp almost done

Posts

Gun lamp almost done

#1

Gun lamp almost done

John Lucas

Wow finally. I got the rifles mounted and figured out a way to hold 2 pistols behind the rifles. That's the pistol holder in clamps on the right. Will spray it later this morning and then screw it into place and it's done. Well all except probably 4 more coats of finish. There are exactly 400 pieces of wood in this project. Boy I'll be glad to go back to turn a bowl with 1 piece of wood. May do that tomorrow. I had one heck of a time drilling holes for the rifle barrel holder. Could not even remotely get a regular drill in that opening. Then tried my right angle attachment, nope. Tried my old hand drill that has 90 degree swiveling head, nope but close. Then I remembered that I bought some short drill bits at the flea mkt. I looked and sure enough had one just right. Could barely move the crank on the drill but managed to drill the pilot holes with half cranks of the arm. I was afraid I was going to have to come up with Plan B for mounting the thing.



Re: Gun lamp almost done

#2

Re: Gun lamp almost done

Bernie Weishapl

Looking good John. That is quite the project.

Re: Gun lamp almost done

#3

Re: Gun lamp almost done

Galen Vetterick

This is really one unique gun locker John. It has been nice to follow this project from your first idea to bringing it to this point. You put a lot of thought and hard work into it. Great project!

Re: Gun lamp almost done

#4

Looks Great!


Re: Gun lamp almost done

#5

Steven Antonucci

aren't you going to make this a series? 


Re: Gun lamp almost done

#6

Dennis in Southern Oregon

Re: Gun lamp almost done

Dennis in Southern Oregon

John,

Have you run the toddler test yet on the vault for security (with guns removed of course)? :D

Dennis

Re: Gun lamp almost done

#7

Re: Gun lamp almost done

Mike Gibson

Is that felt on the inside?

Re: Gun lamp almost done

#8

Re: Gun lamp almost done

John Lucas

Dennis It will not come open unless you have the key. The top segmented ring holds the door shut. It fits over 2 pins and is rotated so it can't be lifted. The locking mechanism locks the ring in this position so it can't be rotated and lifted thereby locking everything in place. The bottom of the door has 3 pins that hold it in place. The door must be moved out a little at the top and then lifted up to open it.


Re: Gun lamp almost done

#9

Re: Gun lamp almost done

John Lucas

Mike No it's Velspar Stone Flek paint. It's easy to apply, hides all the inner sanding defects, and is reasonably durable once it dries and you put the clear coat over it that they sell. Krylon also makes the same thing. I don't know which is better. Either one of them has a tendency to clog the nozzle and you have to stop and clean the nozzle, although I went through 2 cans and never had to clean it this time. It did clog twice but wiping the tip and turning the can upside down and spraying cleared it both times.

Re: Gun lamp almost done

#10

Steve   it's a series of 1


Re: Gun lamp almost done

#11

George Taylor

It is quite an heirloom you have created!


Re: Gun lamp almost done

#12

Dennis in Southern Oregon

Re: Gun lamp almost done

Dennis in Southern Oregon

John, it was not a serious comment; I saw your lock earlier. I like the project and the results very much. You had to solve a lot of novel challenges to complete it.

Dennis

Re: Gun lamp almost done

#13

Leo Cuellar

SWEET!


Re: Gun lamp almost done

#14

I've thought about adding one more ring

John Lucas

My son had one of these fisher price toys when he was young. It reminds me of the gun lamp if it just had a few more rings. :)

Re: Gun lamp almost done

#15

What an incredible project

Mike Foster

That looks like it is coming together very sweetly John. What a great project and some real innovation you put into it to get it all to come together. Better yet, you shared it all with us as you went along. Can't wait to see the final product.

Mike

Re: Gun lamp almost done

#16

BarbS

That is just Cool.


Re: Gun lamp almost done

#17

Don Leydens

Re: That is just Cool.

Don Leydens

This is really shaping up, John. Looks great and a terrific idea. Wonder what kind of lamp shade you'll pick for this....

Re: Gun lamp almost done

#18

Re: Gun lamp almost done

doug williams

John what an incredible project, well done, it has been interesting to follow.

Re: Gun lamp almost done

#19

Re: Gun lamp almost done

Jim Rutten

If I was to get one of these I would go out and buy the guns and rifles/shotguns to go in it. Nice work, John.

Re: Gun lamp almost done

#20

Roger in MO

Re: That is just Cool.

Roger in MO

Maybe one that is turned?

Re: Gun lamp almost done

#21

Are you taking orders?


Re: Gun lamp almost done

#22

Re: That is just Cool.

Ed in Leaside

Maybe one that makes it resemble a 'light'house.