OT: ICONS
Jim Breeden
Ellis: Is there a road map for all the ICOS in the Post New box. Some I can maybe perhaps by chance decipher, some others . . . . . ? 
Knowledge You Can Build On — Est. 1998
OT: ICONS
Jim Breeden
Ellis: Is there a road map for all the ICOS in the Post New box. Some I can maybe perhaps by chance decipher, some others . . . . . ? 
Jim, I'm not Ellis, nor do I play him in ... *LINK*
Chuck Jones - West TN
... Aw. You know what I mean.
I am assuming you are talking about the H1, H2, H3, etc. I have been wondering about how they work in this context so after I saw your question I played with them a little.
These all do something to any text you have selected. They make it larger, smaller, different color, etc. Best way to figure it out is type something in and then "select part of it" by holding down the mouse button and rolling over it, then click each of the icons, then when you want to see what it did click "Preview". Unless you click preview (or post it on-line) all you will see is some funny looking code that it inserts into your message.
Here is some of my doodling.
H1 = Heading 1
Remember selecting the text is the important part. The icon is going to act only on what you have selected. You can also make the selection by putting the cursor at either end of what you want, hold down the shift key and use the up/down/left/right arrows.
I'm gonna quit while I'm ahead. Not exactly sure what the last two do in this context. Guess we'll have to wait for Ellis on these. Has to do with inserting and image or a quote, but it's not clear to me exactly how.
This image and link was accomplished by using the three optional boxes at the bottom of where you type in the other stuff. Not by using the icons.
Link to Wood Central Home Page
More buttons/features explained
Ellis Walentine
huck did a masterful job of explaining the icons, Jim.
As for the last two icons, the first ((
)) is an image button, which allows you to insert an image that exists on the web somewhere (i.e., has a URL). Just click the button, then paste the URL of the image where the cursor is blinking.
The quote button ((
)) indents text. Click the button and start typing. Your text will be spaced down a line and indented. This is used to enhance readability, like this:
Now is the time for all good men to come to the aid of their country. The quick brown fox jumps over the lazy dog.
Finally, under the rows of icons is a line that says "Upload embedded file:" followed by a button that says either "Choose file" or "Browse", depending on which browser and settings you're using. Either way, this feature allows you to insert a photo into the text of your message. Just click your cursor wherever in the post you want the picture to appear, then click the "Browse" (or "Choose File") button, then in the file dialog box, navigate to the image you want to include, and click the Open button. Assuming you're uploading a JPG image, the file size must be below 100Kb or else it won't be accepted. Other file types may also be uploaded using this feature. Click the little question mark in the blue circle ((
)) for a list of allowed file types and maximum sizes.
Hope this helps.
Ellis
Re: More buttons/features explained
bob davis
ellis, i could barely handle stuff in the past. i hope i can still participate. this new stuff just confuses old farts like me..bob
Re: More buttons/features explained
dick gerard
Ellis,
Whenever I post a response or a new thread, I never see any icons, just a button to upload an url for an image already on the net. What do I need to do to be able to "see" these icons. I prefer to post straight from my PC rather than post to PhotoBucket and include the link to my post or reply.
Re: More buttons/features explained
David Walser
Whenever I post a response or a new thread, I never see any icons, just a button to upload an url for an image already on the net. What do I need to do to be able to "see" these icons.
Your ability to see and use the new icons is controlled by the browser you're using to surf the internet. If you're using the most recent incarnation of Internet Explorer, FireFox, or any of the other "major" browsers, you should be able to see and use the icons. If you are using an up-to-date browser and you still cannot see the icons, the reason is one or more of the settings you've selected for your browser has "turned off" the ability to display the icons.
There are a lot of different browsers and its difficult to give specific advice without knowing more about your individual set up. Hope this generic advice has pointed you in the right direction.
Re: More buttons/features explained
William Duffield
Why isn't the *.rtf (Rich Text Format) file type supported as an attachment type? Does the WebBBS display the any of the file attachments in-line or just provide a link that you can click on to download them?
Re: More buttons/features explained
dick gerard
I'm using Internet Explorer 9. Can you lead me to the section that I need to tweak in the settings?
Um, not quite, David
Ellis Walentine
Actually, the only way you can see the icons is if you are a registered user of the forum AND your preferences are set to your profile username and password. Each computer, browser and messageboard you visit here will have it's own cookie that contains your preferences, primarily username and password (and viewing preferences, browser info, etc.). Once you have a profile set up, you just need to be sure to always use that name and not add anything to it, otherwise the system won't recognize you.
Try a little experiment. Open Set Preferences and change your username somehow (add a number or change anything, really) and save your preferences. When you go back to the board, there won't be any cherries, and if you open a message form, you will not have any of the formatting features.
I could probably diagram this stuff, but it would still be confusing. Sorry about that.
Ellis
How to register
Ellis Walentine
Dick, whatever browser you're using, click the little "My Profile" link in the gray navigation bar at the top of the message list. Fill in the blanks and you'll be registered.
There's more explanation in the FAQs if you need it.
Ellis
File types
Ellis Walentine
The software doesn't support anything but the file types shown in the list, so we're stuck with those. Word documents show up as links, not in-line text.
Ellis
Re: File types
William Duffield
That's about what I expected. I just figured I'd ask, in case it were possible to include RTF, so we didn't have to reinsert the formatting (italics, color, font size, etc.) after pasting the text into this box, if we had formatted it originally in an RTF editor.
Doh! I'm wrong again!
David Walser
And, I'm wrong in public. As usual. Apologies for spouting misinformation.
In my defense, allow me to say that until recently I was running an out-of-date version of Internet Explorer on my work computer. When my version of Internet Explorer was updated to number 8 (which is still out-of-date, but is the most recent vintage that will work with Window XP, the computer's operating system), the new icons became available. (Inter-Galactic determines what I use on my work computer.) This is why I incorrectly assumed the version a user's browser might have something to do with being able to see and use the new icons.
Also, on my home computer (running Mac OS 10.6), I have the most recent versions of Safari and FireFox installed. With one of the browsers, I can see the icons and with the other I cannot. The difference, I thought, was the security settings I had chosen for each browser. (For example, on one I've blocked cookies and on the other I've not.) These differences in security settings DO control my ability to see and use the icons, just not fro the reason I had thought. Because I've blocked cookies, WoodCentral does not recognize me when I visit the forum -- so it doesn't log me in, which prevents my seeing the icons with one browser and not the other.
Did I get that right? Go ahead and tell me where I'm wrong. I used to it and I can take it.