Some talk about burl caps and Terry Scott's photos got me to finally throw this on the lathe and just make something out of it. Big Leaf Maple that I hoped to save the spikes on, but it just wasn't in the cards. It was suggested to me on another site that I call this a compote, so I'm going with that. Anyway, it's dyed black (heavy around the edges), red and yellow. The pedestal is from another piece of scrap maple burl. 7.5" tall x 7.5" wide at the rim, 1/16 thick and finished with tung oil and nervously Beall buffed. All comments are always more than welcome and thanks for looking, Don
Thanks for posting this. I like everything about it. The colors are wonderful. Can you tell more about your dye routine? I can only imagine your nervousness with that thin bowl on the buffing wheels.
Thanks so much Steve, Jamie, Mike and Joe! Your comments are very appreciated.
Ellis-Thank you also. Here is a quick list of how the colors were applied.
1. Sand finished piece very well down to 800 grit or so.
2. Black "Artisan" brand alcohol based dye was applied with a piece of t-shirt (Walmart!). Two extra coats were applied to the outside of the rim and edges of the pedestal. All the dye was applied while the piece was on the lathe, rotating it by hand.
3. I sanded (320 grit) back the black till it looked light in the middle and dark on the edges.
4. Red dye was applied and left as is except for a slight sanding (400 grit) in the middle of the bowl and pedestal.
5. Yellow dye was applied and two extra coats were put in the middle (both bowl and pedestal).
6. Everything sanded with 0000 steel wool.
7. The edges and the void in the middle were sanded (400) to reveal plain wood.
8. About 7 coats of Formby's Tung Oil was applied and after curing for a few days it was Beall buffed (3 wheels).
Love the undulations and the different colors. It all comes together nicely. Looks like it may have warped some from being so thin, which just adds more interest.
the superlatives have been used to describe this beautiful piece. I really like the effect of the dye on the burl. Maybe one day I will get up the nerve to try that.
I must confess that my scrap bin has nothing that looks like that. In fact, my nice stuff does not look that good : (