Stitchwort, a failed experiment (long)
Mike Foster
I got the idea to try out a bunch of new ideas after seeing a SEM of this stitchwort pollen grain. So this is a dodecahedron, which came out well but I used a piece of wet cherry. You can see in the pic of the form in the jam chuck that it was symmetrical, but once it dried the shape came out wonky, about 4" x 3.75" x 3.5". Mistake #1. I wanted to try the Ukibori technique to raise dimples like in the SEM. Now this is no piece to try this on. I was facing different grain orientation on each face, and I had to try to devise some way to back up the piece while making the dimples. I used a mallet and broke out a couple of chunks when the back up I was using by reaching through the opposite hole with a dowel and didn't get the dowel positioned just perfect. Mistake #2. After the dimples were made and the piece carved back I dunked the piece briefly in hot water and raised the dimples. The bumps ended up being quite varied in size, depending on what grain the face they were on had, mistake #3. I decided to try ebonizing the piece similar to a beautiful piece that Keith Holt recently posted on WOW. It still had some cherry color, so I think he used the iron vinegar technique. I decided to try that which became mistake #4. The areas I repaired with CA did not take the mixture, so did not change color at all, I tried some spot sanding and redoing the ebonizing, and that came out splotchy, mistake #5. So I set it aside to dry after the dunking and vinegar treatment and was working on another piece when I heard some little pops. I think I had stressed the wood with my dimpling and getting the wood wet and then letting it dry again, caused the wood to start some little cracks (confined to just around the holes and about 1/4" long). I know that sound and it is not a pleasant one. Mistake #6. So I decided to really ebonize the piece and used some gesso. That worked fine, but then I got the idea to talk to Molly Winton to see if she burnishes gesso to get a little luster. She gave me some hints on this, but also said she will often use leather dye for ebonizing and gets great results, even over areas with CA. So mistake # #7.
I was really pushing with this piece, but really doing it just for fun to see if I could. I certainly learned a whole lot by doing it and that was worth it by itself. I did get a finished piece, but one that will live in my shop as I would never try to sell a failed experiment.





