Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

White Liming Wax? (long)

Posts

White Liming Wax? (long)

#1

White Liming Wax? (long)

david

Have tried to find this at local establishments. Woodcraft used to have it, but have not re-stocked it since it sold out several months ago. Home Depot and Loews paint department people look at me weird when I ask for it. Anybody know of a source? There are issues sending material classified as hazardous to the islands, but I have a sister in San Diego and she comes back about twice a year and we are used to asking friends and relatives to carry stuff back from the mainland. Not so much these days after weight restrictions and security concerns, but still possible. My sister recently carried a 24" long magnet bar-that couldn't be shipped-in her luggage. It was obvious that her bags were opened and searched, but no other issues. She once checked as baggage a 70# hunk of wet redwood burl!! You can see why I love my sister...

Re: White Liming Wax? (long)

#2

Check a shoe store for the white paste wax.


Re: White Liming Wax? (long)

#3

Re: White Liming Wax? (long)

Rob W

David:

Craft Supplies USA carries Liberon White Liming Wax - See the link:

http://www.woodturnerscatalog.com/store/Finishing___Waxes___Liberon_White_Liming_Wax___liberon_white?Args=

I have no idea about shipping restrictions, but carrying a volume of white paste in a can through airport security should yield a few strange looks from TSA agents in any airport, I suppose. Not sure if this wax material would be a "liquid" or not, but an 8.1 oz can would be more than the few ounces permitted as a carry-on amount.... probably should check that with TSA before committing your sister to the Spanish Inquisition she'll likely receive when passing through all of the detectors, etc.

Hope this helps!

Rob Wallace

Re: White Liming Wax? (long)

#4

Re: White Liming Wax - homebrew

Bruce Pratt

As per an MSDS, liming wax is 5-10% chalk (Calcium Carbonate), 10-30% Titanium Dioxide, in a paraffin wax/mineral spirits base. Chalk should be no problem, TiO2 aka "Angel White" is available on the net as a white pigment used in soap making.

Re: White Liming Wax? (long)

#5

Thanks, all!

david

Looks like mail order sent to my sister and subsequently packed in checked luggage is the way to go. Mail order will deliver to lower 48 only.

Re: White Liming Wax? (long)

#6

airline check in problems

Dave Staeheli

I was unable to bring a bottle of the old Woodcraft end grain sealer through in my checked luggage. It plainly stated in small print that it had an ignition temperature of 700 degrees. End grain sealer is basically emulsified wax in water. Now if I had brought a candle in my checked luggage, I would have been fine. If I brought paper with a spontanious combustion temperature of 451 degrees, I would have been fine. But the bottle had a warning that it would combust at 700 degrees. Frankly, if the cargo hold of an airliner has a temperature of 700 degrees, I think the pilot has more on his mind than a bottle of end grain sealer.

BUT, the TSA has no sense of humor, are not the brightest employees and are not allowed to use a lick of judgement. I think a lot of stuff gets checked through that is a lot more dangerous than end grain sealer, but do they print the ignition temperatures on the packaging? I think you can do a lot of damage with a can of hair spray. I would seriously worry about your sister getting called out of the waiting area and down to the TSA luggage security area to remove that can of wax. Which is wax dissolved in a solvent. Which has to be disposed of outside the terminal. And then go through security again.

Re: White Liming Wax? (long)

#7

Re: White Liming Wax - homebrew

John Lucas

Bruce isn't Titanium Dioxide just white paint or at least that chemical mixed into a binder.

Re: White Liming Wax? (long)

#8

Re: White Liming Wax - homebrew

Henry (Raleigh, NC)

John: Yes TiO2 (titanium dioxide) is mixed in most paint, not as a binder, but as a white pigment.

Henry

Re: White Liming Wax? (long)

#9

Re: White Liming Wax - homebrew

john lucas

Henry that's what I meant that there is a binder mixed in or vice/versa

Re: White Liming Wax? (long)

#10

Anyone used cream shoe polish? *LINK*

Dick Coers

I've wondered about using paste or cream shoe polish. Looks like lots of colors available.


cream shoe polish

Re: White Liming Wax? (long)

#11

Re: Anyone used cream shoe polish?

john lucas

Dick I've used brown and it works for what I needed it for. I assume white would also work. I use the brown over Mahagony. I dye the wood red and then put the brown shoe polish on. It colors the wood as well as leaving color in the pores. It makes it look a lot like the antique mahagony furniture you see all over the place.

Re: White Liming Wax? (long)

#12

Re: Anyone used cream shoe polish?

Stuart Johnson

I've never used liming was but I thought it was used to fill the pores for a contrast. Wouldn't this color the piece rather than just fill the pores?

Re: White Liming Wax? (long)

#13

Thanks!  Something to consider.


Re: White Liming Wax? (long)

#14

Re: White Liming Wax - homebrew

Scott in Falcon

Russ Fairfield's website has a lot of information on using colored waxes as well as recipes for making your own.

http://www.woodturnerruss.com/Wax/Wax-8-Colored.html

Re: White Liming Wax? (long)

#15

Re: Anyone used cream shoe polish?

Dick Coers

I've used thin acrylic paint to fill pores. You just have to work a small area, and work it wet. Applying it over a thin coat of shellac also helps keeping it from coloring the hard grain of ring porous woods.

Re: White Liming Wax? (long)

#16

Re: White Liming Wax? (long)

clay foster

Spackle works well. You can make it any color you want with acrylic paint, put any finish over it, and you can get it at the hardware store.

Re: White Liming Wax? (long)

#17

and it sands easily and cleans up with water


Re: White Liming Wax? (long)

#19

Drywall mud for brick lamp

John Lucas

I was making ornaments one day and decided to see if I could make one that looked like bricks and concrete but would of course be hollow and very light. It worked out so well I decided to build a lamp using the same technique.

I cut grooves in the lamp. I used the toe of the skew for the horizontal lines and ground a brocken router bit to shape to make the short vertical lines. I used a table top tool rest for the router and an index head to keep them lined up.

Then I dyed the lamp red and sealed it with lacquer. Then I rubbed dry wall mud into the grooves. I wiped off most of it with a damp cloth and then carefully sanded with fine paper to get rid of the rest after it dried. Then I applied my usual lacquer finish.

The concrete was done by spraying Krylon Stone Flek onto the wood. This gave it texture. Then I sprayed it with Gray primer. Then I used white spray paint and held the can about 2 feet away. I just sort of squirted at the gray until it had lighter more concrete look.