Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

powered respirators?

Posts

powered respirators?

#1

powered respirators?

Andy Lincoln,in Dearborn MI

Hi All,

I am being made more aware of sensitivity to certain woods mainly Walnut,Cocobolo,&Jatoba.I have been looking for a powered respirator & came across the original Trend Airshield new in a box for under$200/ delivered.Should I hold out for for the more expensive Airshield Pro?It would be quite awhile before I could afford a 3m system.

I have been wearing a 3m cartridge respirator and taking Benadryl to help ease the effects but the respirator isn't the most comfortable.

Thanks in Advance,

Andy

Re: powered respirators?

#2

Re: powered respirators?

Josh Bowman

I've had a Trend Pro for a year and half. Love it. I wrote an article about it here:http://www.woodturnersamerica.com/index.php?option=com_content&view=article&id=116:power-air-purifying-respirators-paprs&catid=71:ppe&Itemid=90

Re: powered respirators?

#3

Re: powered respirators?

Steve Harder

My eyes always seem sensitive to dust but I wasn't ready to spring for a powered helmet.

So I ran a 1 1/2" dia hose from a cheap bathroom vent fan located about 20ft from my lathe - intake is pretty much out of the dust zone. The hose drops from ceiling and comes up my back to top of my faceshield.

It provides a wash of fresh air down over my face that keeps most of the dust away from my face.

So not a big investment and could be helpful until you spring for the real-deal.

Re: powered respirators?

#4

Re: powered respirators?

Ralph Lindberg

I own a base Trend, it works and your price is reasonable.

That being said, if I had the money I would get a 3M

Re: powered respirators?

#5

Ellis Walentine

That's a new one on me!

Ellis Walentine

But, necessity being the mother of invention....

What an interesting approach. Post a photo sometime.

Ellis Walentine, Host

Re: powered respirators?

#6

Re: powered respirators?

D. Hansen

I have had both versions. The Pro has it hands down over the original. Anything though is better than nothing. I'd wait for the $ $ for the pro but not too long.

Re: powered respirators?

#7

Re: powered respirators?

Bill Howatt

Person in our club did similar with the Triton hard-hat & face shield respirator after the batteries died.

You can also buy fairly cheap HEPA filters made for room air-cleaners and incorporate them into a box housing the fan for extra clean air.

Bill

Re: powered respirators?

#8

Re: powered respirators?

Jeff Brockett

I have tried a couple of respirators but the Trend Pro works the best of any.

Re: powered respirators?

#9

Chuck Jones - West TN

I'm glad I bought a Trend Pro

Chuck Jones - West TN

I'm sure breathing easier. But I have never tried any of the others. Took a little while to get comfortable with putting the darned thing on and off.

Re: powered respirators?

#10

Re: powered respirators?

Mike Gibson

Works even better if you vent it out the workshop and bring in fresh air.

Re: powered respirators?

#11

Re: That's a new one on me!

slharder

I'll get a pic some time.

But not much too it

- used new sump pump hose (made sure it was thin and flexible)

- ran it from a cheap bathroom vent fan located 20ft away

- hose comes down from ceiling and loops up my back

- velcro strapped to back of headband on Uvex faceshield

- and continues up over top of headband and ends in faceshield brow

- and attached small piece of ripstop nylon from brow shield as sort of a cap to keep dust from settling onto top of head

I get a nice airwash across inside of faceshield, but it doesn't really touch my skin, not really noticeable except whisper of air moving.

I work hard to capture dust when sanding with a DC but this keeps my eyes (and lungs) very happy.

I wear it for most of my rough turning, especially with any wood that is dusty.

Someday I'll probably pop for a powered helmet, but this gets the job done with no batteries to charge, and it doesn't add much weight to my (already too big) head.

Re: powered respirators?

#12

Re: powered respirators?

Andy Lincoln,in Dearborn MI

Hi All,

Thanks for the comment and advice .I was able to purchase a slightly used Airshield Pro for a good price.I have to wait for shipping from Vancouver BC but it should help immensely.

I am also looking into my dust collection options to assist even further.

Andy