Beall Buffing System
Tom
Any tips on how best to store the Beall Buffing System without disassembling the wheels from the shaft? (Aside from keeping the system in an area free of excessive dust and debris).
Tips appreciated!!!
Knowledge You Can Build On — Est. 1998
Beall Buffing System
Tom
Any tips on how best to store the Beall Buffing System without disassembling the wheels from the shaft? (Aside from keeping the system in an area free of excessive dust and debris).
Tips appreciated!!!
Re: Beall Buffing System
Chuck Jones - West TN
I have to admit I never thought much about it. I've always tossed mine into a box. Been doing that for over three years and they still work fine.
I do have to hit my bowl buffs with a wire brush occasionally to wake them up. They tend to fall over and get sort of gummy.
I'm anxious to see if anyone thinks special care is necessary.
Re: Beall Buffing System
Harry Robinette
I store mine in 1 gal zip-lock bags. My bowl buff are in qt zip-locks and my wax,white D and Red Rouge are in sandwich bags and then in the buff bags.No dirt or dust in any of it. Does it make a difference I really don't know but it makes me think it does.
Re: Beall Buffing System
Jim Sebring
Pretty much like Harry, I put each of the three wheels in a separate zip lock bag, then put them in a bucket with a lid. Keeps the dirt off of them.
Re: Beall Buffing System
darrin hill
mine are always covered in sawdust, even though i use them about once a week... never noticed any bad side effects..
I thought about nailing a 2x4 to my bench that has a hole drilled in it that fits the mandrel about 3/4ths of the way up so the pad doesn't touch the wood.. but it would sit vertical in the hole and be out of the way...
Re: Beall Buffing System
Brian McKearney
I found a bucket at Home Depot (in the paint department for a couple dollars, I think) that was just the right size to stack them in the bucket with the buffing compounds on top and then I just put the lid on loosely and put it on a shelf. Keeps the dust out and they're safe and sound.
Brian
Re: Beall Buffing System
Jeff Willaford
I'm with Harry except the compound is stored in the bag with the appropriate wheel. Like Harry, don't know if it makes a difference but it makes me feel better about it.
Re: Beall Buffing System
Hal Taylor
Tom, I just store mine in the box it came in. Has work for about three years now.
Re: Beall Buffing System
Tom
Many, many thanks to all for responding! I have some excellent choices now--but I think the bucket solution will be my pick!!
WC is a great site!!
Re: Beall Buffing System
Bill Turpin in WNC mountains
Mine is stored on an older unused lathe. Ready to go and wraped up with plastic grocery store bags to keep it clean.
Re: Beall Buffing System
Ric Taylor
My buffing wheels are in separate ziplock bags, and the entire system is kept in the box that it came in.
Ric
Re: Beall Buffing System
Terry Scott
I dont have a problem as I brought one and its still in the original box unopened l.o.l
One day I better set it up the fear is our softer woods like Kauri wont take kindly to buffing and the buffing compounds will stain the wood '
Re: Beall Buffing System
matt overton
Terry, I'm curious to know if they do. I have not had any ill effects in any wood.
Re: Beall Buffing System
Peter Charles Fagg (UK)
Like other posters I keep my wheels etc. in the original box until required.
Regards Peter.
Re: Beall Buffing System
john lucas
Terry I never buff just the wood. I buff the finish that I put on the wood. You can buff the wood but it doesn't have any protective layer and still needs finish. The buffing also leave a wax on so you would have to clean that off before applying any finish. At least I would think that would be necessary. I haven't tried it because I always and finish using the buff as the last step if necessary.
Re: Beall Buffing System
Wayne Kuhn
My 8" buffs (used most often) live in this box with the compounds, My bowl and goblet buffs live in a freezer bag in a drawer.


Re: Beall Buffing System
Bill Blasic
Terry,
That is funny as mine too sits in the box unopened. 
Bill
Re: Beall Buffing System
Randy Gleckler
Nice Setup... I like it.