Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Observations on Coring -Long

Posts

Re: Observations on Coring -Long

#26

Observations on Coring

Jeff Willaford

The Kelton coring system is only physically demanding if one fights the tool rather than letting it do the work IMHO. As Carole said... the hardest part is mounting the blank on the lathe. Practice is required with any of the coring systems and none are a given.

Re: Observations on Coring -Long

#27

Re: Observations on Coring -Long

Starry Chan

With the Kelton system, the knife is pushed into the core via the gate. This requires force, With the Oneway system, the knife is pivoted so it is a swinging of the handle driving the knife into the core. Also, there is no planning needed for the knife trajectory. The knife cannot go astray. The disadvantage is that you always get hemispherical bowls.

You are right that it is more physical to mount the blank. One of the pieces cut out the Madrone burl batch weighted 260 pound with a 23" diameter and 10" tdeep. It took three mans to mount it between centers for cutting the outside profile. I left this turner shop before he mounted it for coring. I would have loved to stay to see how he mount this for coring.

Starry

Re: Observations on Coring -Long

#28

Re: one of the few things on a lathe that I still.

Clifton C

Dale,

This is the one thing that turned coring from apprehension to almost a breeze.

My blade drops 3/8ths when fully extended. About half way through coring,

the blank would try to crawl on top of the blade. Once I started setting up with the

blade on center when fully extended, problem solved. This one little nugget changed the

whole coring process. Sometimes I feel the blade is self feeding and I have to pull back on the handle to slow it down. I don’t remember reading about this anywhere, but it should be in bold print. I like your idea of the stop collar, I think I’ll go get one.

c

Re: Observations on Coring -Long

#29

See Clifton C post above

Jeff Willaford

The experience I've had is like Clifton says above... a tendency for the knife to self feed. If anyone has to use force with the McNaughton Center Saver system something is set up wrong or the knives are not sharpened properly. Just my opinon. Proper aiming is definitely important with the Kelton system where other systems may follow a more restricted path.

Re: Observations on Coring -Long

#30

Re: Observations on Coring -Long

Carole Valentine

If one has to force the blade in coring, he or she is definitely doing something wrong! If that's the case then it is usually one of 3 things: either the tool is dull, shavings or sap gunk is blocking the cutting edge, or the setup is wrong. One of the things folks need to learn with the McNaughton is how to hold the blade back a bit, especially in the transition area.

Re: Observations on Coring -Long

#31

BarbS

This is a very Useful Thread!


Re: Observations on Coring -Long

#32

Re: one of the few things on a lathe that I still.

Dale Bonertz

Clifton,

I agree that the self feeding should be in large print. It catches by surprise the first few times it happens. You probably have figured out that it happens when you transition from cutting face grain to end grain. The only way to stop the self feeding is speed. Turn the speed down until you are controlling the rate of feed rather than the tool controlling the feed rate (self feeding) through this transition area.

Thank you and Barb for the kind words.

Re: Observations on Coring -Long

#33

Steven Antonucci

Possibly the best tip of the year

steven antonucci

I never thought of taking a look at where the tip would be at full extension. I have no doubt that you are dead on accurate in your assessment.

As far as self feeding goes, I am always cognizant of the fact that if it's cutting that well, I am going to jam a shaving and so I clear it often. I keep my compressor hose nearby, and use it to blow out the cut frequently.

Steve

Re: Observations on Coring -Long

#34

Bill Blasic

Re: Possibly the best tip of the year

Bill Blasic

I was aware of the self feeding thing before I even bought the system. I think it was on Mike Mahoney's DVD or perhaps Grumbine or Robo mentioned it.

Bill