Not to disappoint those with that view I offer a pair of battery mills I have just completed for a client. They are 6" tall and 3 1/8" in diameter. The finial nut at the top (silver cylinder) have S & P stamped on them to help further identify the contents.
really well done. The painting is really top notch. How did you do that and keep the lines clean yet get a nice gloss finish? Friskit? Did you use enamel, or acrylic paint? A really nice job. Bet your client was ecstatic with the result.
Extremely well done. I would also like some info on how you did the painting. I'm working on designs for 2 projects that have need for more accurate detail than I can do by hand. I've been looking at homemade decals as well as air brushing.
Thank you for your nice comment. I knew I would have to send this post in. It was rather naughty of me not to say how the 'painting' was done.
There was a clue in that I said it was done 'for a client'.
I had to turn the mills sycamore to very tight measurements, within 0.5mm. Yes, I know wood moves but..... more on that later.
The measurements were given to the client who then arranged for their 'labeling people' to scale up the normal battery label size to my dimensions. New labels were made and the client rolled the thin plastic self-adhesive labels on themselves.
The only turning skills I had to use were getting the dimensions of the two mills exact.
I did feel it was necessary to give the client a 'health warning'. i.e. wood moves and there is the risk that air bubbling can occur under the labels.
It was a good test for me and I have to say I am pleased with the result.
There are mills I turn which require the words Salt & Pepper on them.
Here in the UK, laser engraving is expensive so I use decals. I type up the size/font on a word processor and print them off on special paper which are then 'stuck' on the mills and to protect the decal I spray the mill with acrylic lacquer. I'm not sure on the paper's availability in the States, I can give you a UK website address if you have problems getting it, should you decide to go down that route.
I've done some searching a year or so ago and you can find decal paper at a lot of the RC modeling stores or order it online. Be aware that there are papers that have a white background and papers that have clear. I screwed up and bought the white because I didn't know better. On these you would have to very accurately cut out the decal because all background is white. Won't work well for letters. The reason they make that is you can't print white so if you need white in your design that's what you use.
.... and not the slimmer "AA" cells...... ...the height-diameter ratio looks "off"..... I even took out a few batteries to see if my eyes were deceiving me!
Great job turning to exact specs......!! This is the one thing I dislike about spindle turning when making replicate parts.... ...it takes all the fun and flexibility out of turning when you have to turn exactly to a specified shape. This is much more like "work"....clearly it requires a lot of skill. When I teach turning, I always comment on how much harder it is to do an excellent job with replicate spindle turning, than it is to turn bowls and other one-of-a-kind vessels.
Re: The me, they look more like "C" or "D" cells..
Chris West
Rob..... I've just checked it was a 'D' battery. The height was governed by the length of the traditional mechanism I used, 6".
You are opening a can of worms here Rob when you say, "making replica parts takes all the fun and flexibility out of turning". I do agree if it were 100 parts that had to be made.
I guess it's my engineering background that allows me to enjoy turning
Thanks again. These were very fun. I remember about 30 years ago when a friend and I built a 4 foot tall replica of a Peanut butter plastic jar for an advertising agency in Nashville. They did all the graphics we just had to build the "jar" which looked a lot like the modern butter containers.