Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Pictures for Gary (and anyone else)

Posts

Pictures for Gary (and anyone else)

#1

Steven Antonucci

Pictures for Gary (and anyone else) 

steven antonucci

In the spirit of posting pictures of what were doing:


Walnut "vessel" with its first coat of Watco. I can only surmise how many more it will take...

Ash goblet that I made to illustrate "the Golden Mean"... it's probably as close to Golden proportion as I can make. It will be used to discuss design at an upcoming demo I will be giving.

Pencil Pot. Not done yet, but off of the lathe... I have no idea what I will do to finish it.

The last thing is a marudai that I made to do kumihimo braiding. What the heck is kumihimo braiding? It's this:


I'm not exactly sure where it is going, but it's pretty simple to learn with a little help from Youtube. I also turned a dozen Tama in holly, pear, and maple to hold the threads.

You can see it in action here:


Steve

Re: Pictures for Gary (and anyone else)

#2

Re: Kumihimo

Alan Van Art

I've been wanting to make a Marudai for years. Did you weight the Tama? What size did you make them?

Re: Pictures for Gary (and anyone else)

#3

Steven Antonucci

I started making it hard, and then simplified

steven antonucci

The tama are all about 1.5" around at the widest point, and probably 2.5" long. I don't know how much cord they would hold, but my arms would certainly be tired out before I ran out of cord.

I had debated drilling them out and stuffing them with shot, but for the size that I have worked to date, I haven't needed the extraweight to hold tension. I will likely chain maille a small counter weight just to make it look fancy in V2. Currently, I use a spring clamp hung under the marudai on the work piece. It's not pretty, but it is effective.


I used QSWO, but I probably will use cherry when I make the "real one". I will make the base square with a hole similar to the top, to make flat braided pieces more easily. The QSWO I have has a lot of character, but I think a simpler wood will have a much better effect when complete. I have a project in mind... and I will post it here once finished.

But for now, I have a functional marudai and tama...

Thanks for asking

Steve

Re: Pictures for Gary (and anyone else)

#4

Re: I started making it hard, and then simplified

david

Fascinating stuff! Actually never heard of it before, and there are a lot of Japanese in the islands. Learn something new every day...

Re: Pictures for Gary (and anyone else)

#5

Steven Antonucci

I'll be inlaying the tama with silver dots

steven antonucci

I have plans to make the tama more decorative, and I will be inlaying them with abalone shells and silver wire... thanks to your box!

S

Re: Pictures for Gary (and anyone else)

#6

very interesting, Steve!

GaryG in MD

The photo certainly shows the breadth of what you're working on right now, and the video clip shows some depth. I hadn't heard of kumihimo, but it's intriguing. Thanks for the update and lesson. ...Gary

Re: Pictures for Gary (and anyone else)

#7

Re: Pictures for Gary (and anyone else)

R Henrickson

Nice work -- both the turning and braiding.

I did some kumihimo work some years ago, but never made a marudai or any tama (it was before I took up turning). Whatever I used when I did the kumihimo-- I don't remember at the moment -- it was makeshift. Maybe I ought to pull the books off the shelf and try again.

Re: Pictures for Gary (and anyone else)

#8

Steven Antonucci

Probably a Kumihimo disk?

steven antonucci

They sell them in craft stores to make "friendship bracelets". It is a disk of stiff foam rubber with slots cut in it to hold tension. The Marudai can not only work with larger cordage, but works much more quickly, especially if you are ambidexterous (I am, moderately)

I started by making my own kumi disk (no shock there, right? :D) out of a piece of craft foam (I wasn't spending $12 on one... :b)

steve

Re: Pictures for Gary (and anyone else)

#9

Re: Probably a Kumihimo disk?

R Henrickson

I may have used a piece of cardboard from the back of a pad of paper.

Re: Pictures for Gary (and anyone else)

#10

Re: Pictures for Gary (and anyone else)

Kernie Gilliam

Could you tell me how you posted these pics, I just cannot figure out how

Re: Pictures for Gary (and anyone else)

#11

Posting Pictures

Doc Green

Kernie, first, you have to complete a profile with at least a user name and email address.

Then, click on Reply or Post New and you will get a screen where you can type your message.

Just above the message box, and to the right of the smiley faces, there is an "Upload embedded file" option. Click on Browse to select the pic you want to upload. Then click on post. I think that's about it. ~Doc

Re: Pictures for Gary (and anyone else)

#12

Re: Posting Pictures

Lewis Dodd

Doc ,

I got that part, but every time I try to post I get the message "fdile size too big", limited to 100....

somewhat ferustrating!

Re: Pictures for Gary (and anyone else)

#13

Re: Posting Pictures

Doc Green

Are you using photo software to "Resize" your pics so the file size is less than 100 kb? This is mandatory.

Several free programs can be downloaded to do it, but I prefer Photoshop Elements because it lets you know exactly what the file size will be, and will do much, much more.

Re: Pictures for Gary (and anyone else)

#14

Re: Posting Pictures

Lewis Dodd

Hey doc...Thanks. I used to be pretty good on these computers, but it seems with age, they have gotten away from me.

Is the photo shop free or can you mabe give me a link to get a free program that will work for me?

Re: Pictures for Gary (and anyone else)

#15

Re: Posting Pictures

bill Crommett

There is a free shrinker that is called "shrink pic ". I have never tried it but it is there, so try it.

Re: Pictures for Gary (and anyone else)

#16

Lewis,

GaryG in MD

See my post here on 1/18 with the subject of "how to handle photo sizes for posting..." That will give you the basics. ...Gary