Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Drum sticks 101

Posts

Drum sticks 101

#1

Drum sticks 101

Jorge

Yesterday I made 3 sets of drumsticks, a request from my youngest, 1/2" thick, tapering to 3/16" behind the bulb at the tip, 15" long and was surprised to find just how much elm whips about, red oak was better and finally dry birch was dignified.

The surprise came when sanding, the dust did not fly, just became parasitic in my hands... Very cold in a non heated shop.

What woods would be best for this job? That was all I had at the moment, soaking green...

Re: Drum sticks 101

#2

Re: Drum sticks 101

Lewis Dodd

Well, you gave me an idea, I think I will try some out of mesquite and Arizona Ash.

Re: Drum sticks 101

#3

Re: Drum sticks 101

Mark

I saw a program on CBS about the world's largest maker of drumsticks. The make them out of maple---each pair comes from the same piece of wood. They were quite meticulous about their wood.

Good luck.

Re: Drum sticks 101

#4

Re: Drum sticks 101

Dale Miner

Never made drumsticks, but have done conductors batons.

For the sticks, I would think kiln dried (or at least well air dried) hard maple, or sapwood shagbark hickory.

Re: Drum sticks 101

#5

Re: Drum sticks 101

John Jordan

By far the most common is hickory. Good sticks are actually matched by tone and weight-they weigh and try them one by one, sort and match them.

My son is finishing his doctorate in drumming (percussion) I bought and paid for a lot of sticks and mallets over the years, but now he is sponsored :D He does make some of his own timpani mallets.

John

Re: Drum sticks 101

#6

Re: Drum sticks 101

Jorge

Thank you all, the elm useless, already all twisted...

John,

I thought of hickory, but it does not grow here, I am using riven wood to insure as straight grain as possible. I can get very dry hard maple and will go with that.

That is very interesting that they match tone and weight, I am deaf, so I'll have to use an instrument or have her work with me to tell the tone. She is a top notch flute player, now experimenting with drums...

Re: Drum sticks 101

#7

Re: Drum sticks 101

Barry Irby

Maple is good but somewhat flexible. The advantage is that it absorbs some of the energy and protects your hands. Hickory is the most popular and works well but transmits more energy to your hands. Oak is the strongest and most rigid, sending the most energy to your hands but are less prone to break.

There is some Japanese wood that is supposed to to be the very best, but I can not recall what it is. Maybe somebody else will chime in.

Re: Drum sticks 101

#8

Re: Drum sticks 101

Jorge

Good info,

thanks Barry

Re: Drum sticks 101

#9

Chris Groves

Re: Drum sticks 101

Chris Groves

Vic Firth is an accomplished professional drummer who has his own firm making drumsticks and kitchen items (pepper grinders, rolling pins, etc). His website is a nice resource on drumstick materials, and shape.

http://www.vicfirth.com/products/americanclassic.php

Re: Drum sticks 101

#10

Steve Kubien

Re: Drum sticks 101

Steve Kubien

I uses to commit drumming when in high school. I was never any good on a kit but I was ok at timpani. Loved it!

Re: Drum sticks 101

#11

Chuck Jones - West TN

Re: Drum sticks 101

Chuck Jones - West TN

The local Barbeque joint buys hickory drum stick blank culls, trim offs, etc. by the dump truck load from a nearby sawmill. I never gave it much thought or asked about it, but there must be a drumstick manufacturer not too far away. If you don't find a better solution let me know and I'll check it out and send you some blanks.

I'd offer to saw you some, but it would take a long time to get them dried the way I do it, with air drying. Plus I would be guessing how to select the best wood for a drumstick.

Re: Drum sticks 101

#12

Re: Drum sticks 101

Jorge

Chris,

That is a good place to look, thank you.

Re: Drum sticks 101

#13

Re: Drum sticks 101

Jorge

Chuck,

That is a very generous offer, if the maple source falls through I will contact you via e mail.

Thank you!