Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Some Pendants I Made Recently

Posts

Some Pendants I Made Recently

#1

Some Pendants I Made Recently

Don Orr

These are the pendants I was refering to when I asked about finishing recently. Left to right-Tulipwood, unknown Rosewood, 3 Kingwood. The center one was hand shaped and had the hole and a small depression turned into it. I also made my own bail for the center onekind of crude. I even sold 2 of them. Nothing really special but I am pleased with my results using the Joyner backing plate fixture. Lots to explore and experiment with.

Any and all comments welcome.

Re: Some Pendants I Made Recently

#2

Keith Tompkins

Re: Some Pendants I Made Recently

Keith Tompkins

HI Don, Nice job.....what is the Joyner fixture?

Re: Some Pendants I Made Recently

#3

Steve Kubien

Re: Some Pendants I Made Recently

Steve Kubien

Real nice Don. Care to show a close up of the bail?

Keith, the Joyner pendant jig is quite a clever bit of kit. Check Ruth's site as I believe she carries them.

Re: Some Pendants I Made Recently

#4

Rob Wallace

Re: Some Pendants I Made Recently *LINK*

Rob Wallace

Keith:

Have a look at Steve Worcester's pendant jig page (and the link to Ed Davidson's video on using it) to see what is meant by a 'Joyner Fixture'. Ed did an excellent video on how this eccentric jig works.

Richard Joyner developed a really neat system of two machined aluminum plates that can easily allow small scale eccentric turning on essentially any lathe. These pendants and other items are fun to make and to experiment with. Making pendants is interesting, easily done, and ladies seem to be interested in the pendants as another form of "earthy" accessories.

I haven't gotten mine out in many months, but hope to "get a little eccentric" after I finish a bunch more bowls for replenishment of my sold work in two galleries. 'Till then, "there's a whole lotta sandin' goin' on"......

Happy Holidays!

Rob


Joyner Pendant Jig at turningwood.com

Re: Some Pendants I Made Recently

#5

Re: Some Pendants I Made Recently

Brian McInturff

They really are fun to make an experiment with. My wife wears them all the time. If I had ample amounts of time on my hands I could sell these real easy. Or I should say my wife could sell them. Her problem is she wants to keep them! I really like the hand shaped one. Hadn't thought of doing that.

Re: Some Pendants I Made Recently

#6

Re: Some Pendants I Made Recently

Bernie Weishapl

Those are a nice bunch Don.

Re: Some Pendants I Made Recently

#7

Keith Tompkins

Re: Some Pendants I Made Recently

Keith Tompkins

Thanks guys....My bad, I was wondering if Don was referring to this tool, or something similar . I thought it was dby Ruth Niles!!?? Yep, I have one!

Re: Some Pendants I Made Recently

#8

Chuck Jones - West TN

Pretty bad indication when...

Chuck Jones - West TN

... we start lusting after tools we already own. :\

Re: Some Pendants I Made Recently

#9

It's called old age Chuck


Re: Some Pendants I Made Recently

#10

Alan Zenreich

Re: Some Pendants I Made Recently

Alan Zenreich

Keith,

Both Ruth Niles and Steve Worcester sell Richard Joyner's pendant backer plates. I bought two of them directly from Richard when they first came out. Very nicely made, and Richard is a great guy.

Re: Some Pendants I Made Recently

#11

Keith Tompkins

Re: Some Pendants I Made Recently

Keith Tompkins

Pendant backer plates??!! I've been turning my crazy bottle-stoppers on mine! I'll have to post the modifications to the tool I've come up with :D Hey Allen...I'm still interested in the project we discussed at Brookfield. I'll get ahold of you after the holidays!

Re: Some Pendants I Made Recently

#12

Re: Some Pendants I Made Recently

darrin hill

two questions... where did you get your bails from (not the homemade one)

and if you dont mind, just curious what you charged for the two you sold.. i got friends wanting to buy some and i have no idea what to charge..

Re: Some Pendants I Made Recently

#13

Re: Some Pendants I Made Recently

Dave Peebles Lyons, Ohio

Hi Don,

Those are fantastic, I wish I have seen this earlier, it would have been a hit with the ladies in my life for Christmas.

Happy Holidays,

Dave

Re: Some Pendants I Made Recently

#14

Re: Some Pendants I Made Recently

Don Evans

Nice job Don:

I really like all of them, what is the finish you used?

Someone asked about the clips etc and where to get them. If you're not familiar with the jewelry industry they call the hangers and clasp "Findings", don't know where that came from but if on a site search on that word. or google "jewelry findings".

If looking for medium to high quality (which I advise) check out:

http://www.riogrande.com

Women are fussy about the quality of clasp and the bail that holds things like this, you don't want their skin turning green and cheap stuff will, on some persons. Also there is an allergic reaction that many have to be concerned with.

My wife cannot wear cheap stuff, at least thats the story I have hear for many years! But thats ok, I tell her I'm allergic to cheap tools also!!

Don

Re: Some Pendants I Made Recently

#15

Alan Zenreich

Re: Some Pendants I Made Recently

Alan Zenreich

Keith,

Yes, Richard Joyner dubbed them pendant backer plates.

If you show me your mods, I'll show you the offset templates I made for mine.

As I did last year, I will again be demo'ing making pendants at the Hudson Valley Woodturner's booth at the Woodworkers Show in Somerset NJ in February.

Last year, I was demonstrating at the same time that Steve A. was demo'ing top turning for his club at the other end of the exhibit hall. Steve points out that in his projects, he throws shavings that are larger than many of the finished items I turn < vbg >

Re: Some Pendants I Made Recently

#16

Reply for Darrin

Don Orr

I found the bails at Michael's if I remember correctly. And yes they are found in the jewelry findings section. I found some nice ones on the web too. I charged $20 and they went without any hesitation. The ones with heartwood/sapwood sold 1st.

Re: Some Pendants I Made Recently

#17

Greg...

Don Orr

...I'll give it a try tonight. (If I remember)

Re: Some Pendants I Made Recently

#18

"HAND SHAPED ONES"?? where?


Re: Some Pendants I Made Recently

#19

Steven Antonucci

With one hand behind my back 


Re: Some Pendants I Made Recently

#20

Re: Some Pendants I Made Recently

Dennis Taylor

Hoping Santa will be delivering the pendant jig on Xmas Morning. What size disc should I start with? and how large is the finished product?. I have watched the demo by Ed, and have seen a lot, his blank doesn't look more than 1/4" thick when he starts, is that about right?..... tks....Dennis

Re: Some Pendants I Made Recently

#21

Re: "HAND SHAPED ONES"?? where?

Don Evans

Adrien, re-read his message. Third sentence gives you the clue.

It says "center one" "hand shaped".

I missed the part about the depression but got that on second read myself.

I've had the Joyner for several months but have not had chance to try anything on it yet. One of these days though.

Don

Re: Some Pendants I Made Recently

#22

Keith Tompkins

Re: Some Pendants I Made Recently

Keith Tompkins

OK, Here's what I did. First, I removed the indexing plate, then I installed the morse taper from the opposite side from where it was originally installed. To prepare my stopper blank, I mount the blank in a chuck, true the end-grain surface, and drill a hole with a drill bit held in the tailstock. I tap the hole to accept a 1 1/2" long 3/8 x 16 set screw. With the set screw installed in the stopper blank, I can now use any number of offsets available.

Re: Some Pendants I Made Recently

#23

Keith Tompkins

Re: It's called old age Chuck

Keith Tompkins

Hey John....They make an "old age chuck"? Who makes it, and where can I get one? ;)

Re: Some Pendants I Made Recently

#24

Re: Some Pendants from YO-YO s.

bill Crommett

I downloaded two of Ed's tutorials on the off center stuff, and put them into the Windows media collection. Now I can't find them. Any help would be appreciated.

Re: Some Pendants I Made Recently

#25

Not sure if this helps

Don Orr


Not a great picture of the bail you asked about. Just some silver colored wire through the hole and wrapped around the cord.