Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Magic Wand w/ light

Posts

Magic Wand w/ light

#1

Magic Wand w/ light

Ray Carson - Lawrenceville, NJ

My son is a HUGE fan of the Harry Potter books and movies. He also enjoys the world of dragons and mythical creatures. He can devourer a book on these topics like nobodys business. So......all inspiring wizards should have their own magic wand, right?

This is a Christmas present for my wizard. So whether he's casting an "Expelliarmus" charm on a friend or using a "Lumos" charm to read his books, I know that he will be well protected with a special wand made from his "muggle" Father.

Materials:

Poplar

Battery cap is made from Ebony

12v - A23 battery & holder

some scrap phone wire

(1) - High visibility, 5mm Round T-1 3/4

Intensity 7000mcd (typical);viewing angle 30°

FW current 25mA; FW supply 3.3 (typical), 3.6V (maximum)

(1) - 470 ohm resistor

(1) - SPST 12VDC/50mA 5.0mm High Tact Switch

3/4" brass escutcheon pins (cut)

(2) - 3/16 x 1/8 rare earth magnets

Electrical components are from Radio Shack. A few items were bought at Home Depot.

A special shout out to John Lucas and my cousins husband Kevin Stanbary for helping me out with the electronics. So what do you think?







Re: Magic Wand w/ light

#2

Re: Magic Wand w/ light

Neil Longhenry - Rogers, MN

That is really great Ray. I especially like the finish. On the pics. it looks kind of old and enhances the Wizard effect. I am sure your son is going to like it.

Re: Magic Wand w/ light

#3

Re: Magic Wand w/ light *LINK*

charlie belden

Welcome to the world of Internal Light Sources.

Kids are a terrific source of inspiration. They also can get us back to thinking like a kid - to imagine things - to think of WHAT without thinking of HOW. The HOW part is where the ADULT comes in.

This is a great example of thinking as a kid.

Wouldn't it be cool if you could make a magic wand - that shoot light out the end when you pointed it at something and called up an incantation?!

The adult fun comes in trying to figure out the HOW.

Fortunate for Adults - LEDs provide the HOW. LEDs are showing up EVERYWHERE, not just at Radio Shack, now - in keeping with Pdiddy & J Lo- shortened to The Shack. You'll find little battery powered LEDs at the check out counter at ACE Hardware, most 7-11s and other Convenience Stores, pet supplies stores (in tags for dog collars) . . . And they're inexpensive - $5 max. Small, low power consumption, the energy used goes to creating light, not heat, and often packaged with "button batteries" and switch. Put one end of a small acrylic rod on the end of the LED - and light will shine out the other end - where ever the other end is - like the end of a magic want. Put "the other end" over a flame, say from a lighter, and it'll crinkle up tto form a crinkled ball - that'll GLOW when the LED on the other end is lit.

The Shack (formerly known as Radio Shack) carries an RGB LED, with built in circuitry, that changes colors when power is applied - flashes red then green then blue before scrolling through the spectrum and repeating the sequence.

Here's a little LED package you can get at a nearby convenience store for about $3


The fun and games with incorporating an LED into a piece is how to replace the batteries and how to switch the LED on or off - while not distracting from the piece.

The link below might be of interest to you if you want to further pursue Internal Lightiing


img

LEDs & Use for Internal Lighting

Re: Magic Wand w/ light

#4

Re: Magic Wand w/ light

Kevin Stanbary in McHenry, IL

Looks fantastic Ray, he's gonna love it!

Re: Magic Wand w/ light

#5

Couldn't have finished the circuit w/o you Kevin

Ray Carson - Lawrenceville, NJ

Thanks !!!

Re: Magic Wand w/ light

#6

I'm a kid at heart Charlie.....soooo  :-)

Ray Carson - Lawrenceville, NJ

It was challenging to make, but REALLY fun too. Nice LINK, thanks.

Ray

Re: Magic Wand w/ light

#7

Steven Antonucci

You are a ROCKSTAR FROM MARS!

steven antonucci

I have had the same idea in my head for a while now, and I knew it could be done! Now, I have no excuse for now doing it...

Pure. Freakin'. Awesome!

Steve

Re: Magic Wand w/ light

#8

Re: Magic Wand

Ray Carson - Lawrenceville, NJ

If you think it looks "old", then I acheived my goal. I appreciate the comments.

Thank you Neil.

Re: Magic Wand w/ light

#9

Re: ROCKSTAR FROM MARS!??  :-)

Ray Carson - Lawrenceville, NJ

Thanks Steve, I really appreciate the compliment. As mentioned, I'm a kid at heart so it was easy to dream up. The "engineer" side of me came out on this project. I must confess that I did try to cast a few charms while in my basement listening to the Christmas tunes.

Ray

Re: Magic Wand w/ light

#10

Steven Antonucci

Is the ebony a rip and reglue?

steven antonucci

assumed, but if not, I want to know your secrets...

Re: Magic Wand w/ light

#11

Re: Is the ebony a rip and reglue?

Ray Carson - Lawrenceville, NJ

Not sure I understand but if your talking about the "quill" or tip. It's also Poplar died black. I wound up drilling a really fat dowel of Poplar. It was slightly longer than needed. Halfway through one end, then the other. Naturally, the holes didn’t align end to end on a clean axis. A 1/8” - 12” long bit tends to drift. So, back on centers they went and I turned it back to round then made the taper with a shoulder. "Protean" a clean hole all the way through. I thought about it and a rip and reglue might be easier and faster. This worked out fine for me. I hope this helped.

Ray

Re: Magic Wand w/ light

#12

Re: Magic Wand w/ light

Hal Taylor

Your son is going to absolutely love this. I can imagine all the intrigue he will dream up using it.

There are probably many of us, me, that don't have a clue how you did the electronics, etc. I'd love some plans/directions if you could supply such.

Re: Magic Wand w/ light

#13

Re: Magic Wand w/ light

Bob Macgregor

I've mulled over how to accomplish this, too. Your success is encouraging.

One thing I wondered was whether it would work to have two thin, closely-spaced strips of metal inlay in the handle as switch poles...or some other switching mechanism that isn't quite so obvious/obtrusive as a button.

BOB

Re: Magic Wand w/ light

#14

Re: Obtrusive button

Ray Carson - Lawrenceville, NJ

I agree. I don't like the button either BUT ....... it is what it is. Overall, I'm pleased. I'm sure someone could dream up a better concealment method. This was as about as far as I wanted to go. My plan was to make a wooden button cover but Christmas was just getting too close for comfort.

Ray

Re: Magic Wand w/ light

#15

Re: Magic Wand circuit *LINK*

Ray Carson - Lawrenceville, NJ

I hope this helps.




LEDCALC.COM

Re: Magic Wand w/ light

#16

Re: Magic Wand switch

Ray Carson - Lawrenceville, NJ


Re: Magic Wand w/ light

#17

Re: Magic Wand - Resistor Calculator  *LINK*


ohmslawcalculator.com

Re: Magic Wand w/ light

#18

Re: Magic Wand - Resistor Calculator

Hal Taylor

Thanks Ray for all the info. I've dabbled a bit in things like this and am eager to try this one. This will be a fun toy for kids of all ages.