Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Rikon 70-100 lathe

Posts

Rikon 70-100 lathe

#1

Rikon 70-100 lathe

James Pittman

Is there away to make it run in reverse with out changing motor I would like to sand in reverse. Thanks Jim

Re: Rikon 70-100 lathe

#2

Chuck Jones - West TN

See latest AAW Journal

Chuck Jones - West TN

I haven't read it yet, but I received mine today and at a quick glance I noticed there is an article on the subject.

Re: Rikon 70-100 lathe

#3

Just stand on the backside of the lathe

John Lucas

Or if it's spindle flip it end from end. However the article in the latest issue of American Woodturner is excellent.

Re: Rikon 70-100 lathe

#4

Re: Just stand on the backside of the lathe

James Pittman

I do not do much spindle work ,maybe I am missing something if I stand on the back side of the lathe the fibers in the wood will still be turning in the same direction what I am trying to do is sand the fibers in a differant direction. Thanks Jim

Re: Rikon 70-100 lathe

#5

Lyle Jamieson

Re: Just stand on the backside of the lathe

Lyle Jamieson

There is an easier fix...use sharp sandpaper. Then there is no need to sand in reverse.

Re: Rikon 70-100 lathe

#6

Re: Just stand on the backside of the lathe

john lucas

I agree with Lyle. I've been playing with sanding in each direction. Before that I've always sanded in one direction. You can't tell the difference in my pieces.