Help me learn...Spindle element names
mjonesrdg
I have never been much into spindle turning. I'd like to learn the names of all the design elements of a spindle and could not find anything with a google search. Can you help?
Knowledge You Can Build On — Est. 1998
Help me learn...Spindle element names
mjonesrdg
I have never been much into spindle turning. I'd like to learn the names of all the design elements of a spindle and could not find anything with a google search. Can you help?
Re: Help me learn...Spindle element names
Cyril Griesbach
Books on architecture will get you there but Woodturning Design by Mike Darlow brings it into the turning world.
Here's a link to it on Amazon.
Re: Help me learn...Spindle element names *LINK*
Wayne Kuhn
I have always considered spindle elements either beads or coves Some are longer , some are shorter but they are essentially beads or coves. The exception mat be captured rings (beads) or the pommel cut, the square to round at the top a table leg (cove)This linked online book from 1919 may help in your quest.
Re: Help me learn...Spindle element names
Stuart Johnson
This is from a club site but I can't remember which one.
Great thread.. thank you for the links.
Re: Help me learn...Spindle element names
Jesper, Denmark
That's just about got it covered. 
Re: Help me learn...Spindle element names
Barbara Dill
There are 3 elements in a spindle. The other terms describe the way they are connected and the symmetry. The elements are: cove, bead, and v cut.
Re: Help me learn...Spindle element names
Harry in beautiful downtown Kulpsville
Barbara, what do you call the straight sections (fillets?) that connect the other elements?
Thank You, Stuart
Stem and finial elements: are they spindles?
mjonesrdg
I have enjoyed the recent close examination of C. Drozda's exceptional work, and took an "on the fly" approach to making one. (not as easy as it looked) But, as often is the case, I find that more questions arise and I lack the proper vocabulary of this kind of work to properly express myself.
When I say, "tippy-top spire thingy" or, "bulb gizmo" you probably know what I mean. But what are the REAL names?
Re: Help me learn...Spindle element names
Barbara Dill
I think in very simple terms...straight line, curve...either bead or cove or concave or converse, and v cut or two intersecting straight lines. These elements, in various combinations, make up every profile. The photo Stuart Johnson has is great. I'm sure that is what you were looking for.