Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

*** SURVEY: THE IDES OF NOVEMBER *** *LINK*

Posts

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#26

Mike Stafford

Most important point.....don't use your hands.

Mike Stafford

There is no need to lose fingers on a table saw, band saw, jointer, etc..

I have not allowed my hands to push a piece of wood through any of my bladed tools in many years. I think it was 1978 when I quit using my hands and went exclusively to push sticks, blocks etc. (I had a friend who lost some fingers on his table saw.)

There are no operations on most of the most dangerous tools that cannot be done with some sort of sacrificial push stick or block. I have stacks of push sticks, blocks and etc. in the shop for that purpose.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#27

Ditto Mike- I live with push sticks

john lucas

There is a zone around my saw blade that I never enter. Anytime I have to enter that area it's with a push stick or with the work clamped to a sliding table.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#28

Re: *** SURVEY: THE IDES OF NOVEMBER ***

Stuart Johnson

Do you think that the government should mandate flesh-sensing technology on tablesaws? Would such a ruling be an unwelcome intrusion on woodworkers' freedom of choice, or would it be a justifiable regulation in the public interest, similar in scope and effect to mandatory seat belts and air bags in new vehicles in this country?

Right or wrong I think the case about mandatory health insurance that is going before the Supreme Court is similar. If the government can mandate one why not the other? There is also other technology that uses a different type of sensor (light beam?) that appears to work without damage to the saw. If the flesh-sensing becomes law will it be challenged in court and will other types of technology be acceptable?

By the time congress gets the bill passed it will have so many riders and non bill related amendments it won't be recognizable.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#29

Mike Stafford

Re: *** SURVEY: THE IDES OF NOVEMBER ***

Mike Stafford

Good lord, we don't want it decided by the courts. The courts are populated with lawyers who love to issue rulings that make money for other lawyers.

It's bad enough that it is in the hands of unelected bureaucrats.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#30

Dale Jablonski

Re: *** SURVEY: THE IDES OF NOVEMBER ***

dale jablonski

Having worked for government for 33 years. I believe it is always better if the government stays out of the mandating process whenever possible. Having been bitten by my table saw recently, I do believe that table saws are the most dangerous tool in our shop. I am very supportive of industry taking the lead and offering flesh sensing technology for their products. If they don't then Saw Stop will have a better opportunity to either corner the market or press for mandatory requirements that would benefit them.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#32

Re: Ditto Mike- I live with push sticks

Carol Reed, Pahrump, NV

I'm with John and Mike. Never let your fingers get withi 4 inches of the throat plate, unless your hands ar larger, then increase the distance.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#33

Steven Antonucci

I cut everything possible on a sled

steven antonucci

My hands never get neat a blade anymore. I used to think of push sticks as "only if I need them" and now they are "first and foremost". Only time I don't use them is when I am pushing a large sheet good through and I have feetsworth of clearance.

If I can cut it on my shop built sled, that's where it goes.

Steve

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#34

Steven Antonucci

Remember Sony Betamax?

steven antonucci

Argueably, a better format than VHS, but Sony wanted to hold on to their proprietary right to make the saw and the cartridges. VHS won because it was licensed to a broader market.

Given the choice of having a finger removed or destroying a trunion, I will trash a saw anyday. However, if SawStop wants the premium for it's device, it should also have some sort of "black box" recorder on board to record misfires from cutting wet lumber. The tool should also ship with a replacement unit as part of the package to allow the end user continuous operation after a fire. Part of making a consumable technology like their cartidge is that you have to assume it will be consumed. If I ran a shop and had a saw fire for any reason, I would still need to be able to operate my business.

It's a good idea. It's a good saw. I just don't think that they've got the best business model.

Steve

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#35

Keith Tompkins

Re: *** SURVEY: THE IDES OF NOVEMBER ***

Keith Tompkins

Hi Ellis, Perhaps this disclaimer when purchasing a saw. "I understand the technology exists to prevent table saw injuries, however I have decided not to purchase a saw that uses this technology. I understand I make this purchase at my own risk, and by doing so, I forfeit my right to sue the manufacturer." Signature required.

Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#36

Re: *** SURVEY: THE IDES OF NOVEMBER ***

TomCollins


Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#37

Ellis Walentine

Now *there's* an idea


Re: *** SURVEY: THE IDES OF NOVEMBER *** *LINK*

#38

Re: *** SURVEY: THE IDES OF NOVEMBER ***

Jorge

Table saws have been around for a long while and people have used them safely without flesh sensing technology, making an effort to increase awareness of the perils yes, mandatory use of a gizmo by regulation, NO

It sounds like the company that sells the gadget is lobbying. to force us to buy something we don't need.

Safety YES!, regulation NO!!!