Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Walnut crotch

Posts

Walnut crotch

#1

Walnut crotch

Ronnyeelen

That dead tree of my mother in law resulted in another piece.

This is 57cm wide, at the widest part.

Turning is fun :D


The inside is saned with 80 grit paper, kept stationary while the bowl was turning.

All comments and critques are welcome

regards

Ronny


Re: Walnut crotch

#2

Steve Kubien

Re: Walnut crotch

Steve Kubien

I really like it. Why the decision to stop sanding at 80 grit? Very cool.

Re: Walnut crotch

#3

JL

Nice knot!

JL

Good looking wood.

Re: Walnut crotch

#4

Nice work Ronny!

Jorge

Can you show us the other side?

I like working with crotch pieces myself, when I can get my hands in one.

Re: Walnut crotch

#5

Chuck Jones - West TN

Nice. I love that 80 grit texture.

Chuck Jones - West TN

I really like the effect you created with the stationary coarse sand paper. I don't believe I have seen that before. It's a somewhat similar result to what is achieved with a stiff wire brush (technique learned from John Jordan).

I'd like to see the other side also.

Re: Walnut crotch

#6

Very interesting-love the flat surface


Re: Walnut crotch

#7

Re: Walnut crotch

ronnyeelen

Thank you all for the comments. Appreciated.

I will take a photo of the underside this weekend, and put here.

In fact, it a round bottom, no foot.

The 80grit inside surface is fun to experiment with.

Next time I will use 60 grit, to get an even more obvious effect.

The difference with a wire brush would be that the wire brush would still be revolving on a drill or something. So it will create a rough effect, but as the wire revolves, the different 'hairs' will kind of cut accross the grooves made by the first hairs.

With the sandpaper held in place, it is always the same grit pattern which touches the wood and finally leaves a marking according to that pattern.

Ronny

Re: Walnut crotch

#8

Re: Walnut crotch

Craig Daymon

Very cool bowl.

All wire brushes are not meant for drills and even with those that are does it does not mean that they must be used on a drill. There is no reason they couldn't be held stationary as the bowl turns just like you did with the sandpaper.

I saw someone demonstrate at the Bucks County turners that had a wide collection of wire brushes he used to texture surfaces. I don't recall who it was at this time, sorry. I remember him saying he would pick one up whenever he saw a style he didn't have. Also that they had a limited lifespan.

Re: Walnut crotch

#9

Re: Walnut crotch

ronnyeelen

Indeed Craig, you are right. I was making a wrong assumption.

Although, with the sanding paper I fold it so that only a small surface is touching the wood.

Re: Walnut crotch

#10

Re: Walnut crotch

john lucas

A wire brush will tend to try and follow the grain or may even tear the grain if it goes sideways. Really stiff brushes might do a better job of cutting across grain. I have some pretty stiff ones but purposely haven't purchased the heavy duty kind.

You can of course get really course sandpaper. I have some 24 grit. purchased it for those really bad tearouts.:) Seriously I actually bought it to use for carving with an angle grinder. It will flat out eat wood but will also leave the kind of scratches you want. Go to a welding supply store and you can find it.

Re: Walnut crotch

#11

Re: Walnut crotch

Ray Carson - Lawrenceville, NJ

That's knot a bad piece Ronnyeelen. ;) I like the round bowl portion offset with the angular portions of the crotch. Would like to see a nice glossy finish on this one.

My 2 cents worth.

Ray

Re: Walnut crotch

#12

Steve Kubien

Re: Walnut crotch

Steve Kubien

Oh, somehow I missed that the sandpaper was held still and not revolving. Very cool.