I have a ribbed silicone plug on a wine stopper I made for home use. Every once in a while, when someone pulls the stopper out, the silicone plug remains in the bottle's neck.
If I sell any of these stoppers, I'd like to know customers don't also have this same problem. So, what can I use to permanently adhere the ribbed silicone to the dowel inside it?
Jack if you scuff up the dowel with some heavy grit sand paper that keeps them on. That's what I do and I've not ever had a problem with them. I do recommend Ruth's if you want a higher end stopper. I make the silicone ones for quickie gifts and giveaways.
I liked the idea of using those silicone stoppers and had the same problem/concern. With silicone, not very many things adhere to it. I think Jennifer has a good idea in roughing up the dowel. It has been a while since I made wine stoppers, but it seems like using some uncured silicone from a tube as an adhesive might work in conjunction with roughing up the wood. The uncured silicone may have better adhesion with the cured silicone of the stopper. If you do try this, I would be interested to know if it works .
In a perfect world, removing the silicone stopper from the dowel would be impossible because of the vacuum created by trying to pull the two parts of the stopper apart. Unfortunately, the world (and the wood dowel) is not perfect. Air leaks through the pores in the wood and along the small scratches on the side, breaking the vacuum. Another solution besides the ones mentioned, is to rub a drop or two of wet marine grade silica caulking compound on the dowel. Then pop on the silicone bottle stopper. The caulking seals the pores of the wood and fills all the little imperfections, making a perfect vacuum. I use clear marine grade caulking compound I get in a little tube from the hardware store for a couiple of dollars. Regular grade would probably do, but I find the marine grade tends to adhere better.