Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Laser pointers

Posts

Laser pointers

#1

Laser pointers

Mike Foster

I have tried multiple laser pointers with mixed results. My latest iteration involved a home-made bar with one of the pen type pointers and works OK, but the adjustment on it is fussy and not real smooth. The recent discussions on boring bars got me looking at the Sinner system and his solution for the laser pointer looks more robust and simpler than others I have seen. Anyone use this system? Does it hold up well? Is it easy to adjust?

Re: Laser pointers

#2

Re: Laser pointers

Hal Taylor

Mike, I use a Steve Sinner system and have been very happy with it. With regard to the laser, it is mounted in a square bar. I don't know if this reduces vibration, but it seems to be more stable than a round bar model I have in another system. It is reasonably easy to adjust, but it does take a bit of fussing which is, I think, inherent with all of them. Hope this helps.

Re: Laser pointers

#3

Re: Laser pointers

john lucas

Steve's looks really nice. The Monster tools laser is excellent.

Re: Laser pointers

#4

Re: Laser pointers

Jeff Willaford

I agree with John on the Monster Tools laser. That's the one I use and like. Stubby also has one with a unique adjustment for the pointer.

Re: Laser pointers

#5

Re: Laser pointers

Tony Wheeler

jeff salter is just coming out with a new one that i'm ordering he don't have it listed on his site you will have to email or call him. www.jeffsturnedwood.com

Re: Laser pointers

#6

so many choices

Mike Foster

I have never really investigated laser pointers but the Monster system looks like a good choice as well. I may deep six my cobbled together system for one of these. Thanks guys.

Re: Laser pointers

#7

Dick Hines

Re: so many choices

dick hines

After I went through 3 pointers on the Jamieson rig I bought a laser sight for a hand gun. It will stand the viberation form a 45APC so I think it may be the last laser I buy. I think I paid less than $25.

Search laser pistol sights. There a lot of places to get them.

You may have to alter the laser holder. And you don't need the pig "ring" to keep the light on.

Re: Laser pointers

#8

Re: I agree with Monster

Steve Criscenzo

Can't go wrong with the Monster system. Mine has held up well and is easy to adjust.

Steve

Re: Laser pointers

#9

Re: Laser pointers

Joe Meirhaeghe

Mike I have one of the 1st ones that Steve Sinner made as a prototype for his current model. It works very well for me. The 2 things I like most is that the laser is focus-able from a small dot to a larger one. The other thing I like is the square tube that holds the laser it keeps the laser in constant alignment to 90 degrees to the cutter.

I use to use one with a round tube but always had trouble keeping it 90 degress to the cutter. It seemed like every time I would adjust it I'd some how turn it a little to either the left or right and throw it out of alignment. I don't have that problem with the square tube.

Re: Laser pointers

#10

Re: Laser pointers

Bernie Weishapl

+1 for the monster laser. I have tried quite a few and this has held up now for two yrs.

Re: Laser pointers

#11

Bill Blasic

Re: Laser pointers

Bill Blasic

I have used the Monster laser since the Albuquerque symposium and it has performed flawlessly.

Bill

Re: Laser pointers

#12

Re: Laser pointers

Don Orr

I just saw a demo by Andy DiPietro at our club. He uses the Don Derry hollowers. The laser itself is very similar to the Monster with the switch and battery away from the laser head. It's mounted on an X-Y adjustable mount that makes it very finely adjustable. I have not tried it but it looks like it works well. Don sells them separately on his website. Not familiar with the Sinner version. I have the Monster but have not used it much yet. Not the easiest to fine tune.

Re: Laser pointers

#13

Lyle Jamieson

Re: so many choices

Lyle Jamieson

I have been using the same laser on my home system for many, many years. I suppose they could be damaged by excessive vibration, but I dont go there. Vibration can do a lot more damage then destroying a laser, dont go there.

I think it is important to have a system that allows easy, quick and accurate adjustment. To get the best use of laser measuring it has to be set often and accurately. The size of the laser dot is not important. I use the gap (not the laser) to measure with. The laser could be big, small, oval, or whatever, and it will not influence its accuracy.

There are more of my lasers out there then I could count. If anyone has any laser problems with my system, I would hope they would call me and I will replace it. The laser will last many years, maybe decades.

Re: Laser pointers

#14

Alan Zenreich

Re: Laser pointers

Alan Zenreich

In Jeff Salter's video about his spiraling router rig, he shows his laser mount.

I like what I've seen, and would seriously consider adapting it to my current Monster articulated rig.

I don't know any details about pricing or applicability.

Re: Laser pointers

#15

Another Vote For The Monster

charlie belden

The Monster arrangement - square tube on a round shaft - battery with On/Off switch separate from laser seems better for balance.

The earlier version's "L-shaped" tightening handles, were a bit of a hassle to get on originally because they were close together and got in each other's way. Once on they worked OK. The newer version uses ratcheting handles which avoid the confilict issue when installing and work better than the original set up. Randy also added a horizontal stabilizer gizmo to support and stabilze the top square rod the laser goes in. Dampens some of the bounce if the tool starts chattering.

I know it would be expensive, but a rack and pinion system for In/Out and Left/Right - that could be secured without "drift" would be REALLY nice. (might as well dream big).

Re: Laser pointers

#16

Dick Hines

Re: so many choices

dick hines

Lyle, the laser did not die the little spring that sits on the end of the batteries would get weak. The gun laser fits the laser holder and works good.

And I don't have the explane the rubber ring either :D

Re: Laser pointers

#17

Re: Laser pointers

Mike from St. Clair Shores

Mike,

The new laser rig by Jeff Salter is really well designed. You adjust the laser dot equal distance from the sides and front of the cutter. Then you adjust for wall thickness. When the boring bar is inside the piece, you can move the laser to compensate for the cutting angle without removing it from the piece. it's $150 plus shipping. It is really very well designed!!!

Re: Laser pointers

#18

Andy DiPietro

Re: Laser pointers

Andy DiPietro

Hi Don,

I use the industrial laser from Monster tools and mounted it on my Don Derry hollowing tool. I purchased the laser separately from Randy Privett. It works great.