Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Green Walnut

Posts

Green Walnut

#1

Green Walnut

John Veerkamp

Anyone rough turn green walnut? I've rough turned a lot of green wood, but never walnut. Will it distort as much as silver maple or ash when drying prior to second turning? What about spliting/ checking? I just acquired some nice freshly cut walnut and don't want to loose it. The finished bowls will be 12 - 16 inches dia.

Thanks,

John

Re: Green Walnut

#2

Re: Green Walnut

john lucas

I think it's little more forgiving about checking than some woods. I don't remember much about the warping which means it must not have been all that bad. I have about a dozen drying or actually probably dry right now. None have checked. Maybe one of these days I'll quit moving them around the shop and actually turn them.

Re: Green Walnut

#3

Jerry Louden

Re: Green Walnut

Jerry Louden

John, yes Walnut will distort after rough turning when green, but no more than most other woods. I expect the larger the piece the more distortion. I have never had much problem with splitting as long as you stay away from the pith.

Jerry

Re: Green Walnut

#4

Re: Green Walnut

robo hippy

I have found it to be pretty stable in drying. It will warp, but not as much as some woods. Also, it seldom cracks, unless you didn't turn all the cracks out first.

robo hippy

Re: Green Walnut

#5

Re: Green Walnut

Bernie Weishapl

I turn a lot of walnut and as Reed said it dries well and doesn't seem to me to warp as much as other woods. I have never had one split on me.

Re: Green Walnut

#6

Re: Green Walnut

Brian George

Ii just finished a green walnut bowl with bark and sapwood. It is warping slightly but, no checking. I stayed away from the pith, though.

Re: Green Walnut

#7

Re: Green Walnut

Donna Banfield

Walnut of one of those species that make for very attractive natural edge bowls. If you have pieces that have the creamy white sapwood, it contrasts nicely against the darker brown heartwood.

The best way to turn a natural edge bowl is to turn it once, to final thickness. Sanding will take more time; because of the two higher edges/wings, it will make power sanding with a corded drill more difficult. But taking the time is worth it, in my opinion.

Re: Green Walnut

#8

Re: Green Walnut

jim miles - Charlotte

Agree with above- also it will really stain your hands, tools or anything else.

Re: Green Walnut

#9

Re: Green Walnut

Pete in Holland

And after you try to wash the black stains off your hands with all kinds of cleaners, head to the fridge and grab the lemon juice. Cleans your hands in seconds.

Pete