Re: Paying Your Dues
charlie belden
Brad:
The photography analogy is an appropriate one.
At one time you had only a rather large box camera, that required a tripod to hold it and a black piece of cloth you had to be under in order to see the upside down image cast on a ground glass plate at the back of the camera's box. When you saw what you wanted on the film, you loaded a "plate" into the camera, pulled a sliding plate out from in front of the film, removed the lens cover and started counting, guessing or ball park calculating the expsosure time. There weren't and "f stops", no shutters, no light meters, and if you needed more light you had to use Flash Powder. Because of the limited ASA, you needed fairly long exposures and your control of the depth of field was very limited. The limitations of photographic technology severyl limited what could be photographed well.
Even the revered SpeedGraflex had many of those limitations, as did the film of its time. Could you take excellent photographs of relatively still things and people with it? Certainly. But you couldn't take candid shots, or decent shots of anything that was moving quickly or work in very low light situations "on the fly"? But the negative size allowed for touching up flaws in the image - with pencils - and a good eye and steady hands.
Along came the Rollies (sp?) and the bulk of the camera was reduced significantly and that allowed shots to be taken that couldn't be taken before - without a LOT of control of the subject and its environment. But you still needed a separate light meter in certain situations.
When the Single Lense Reflex cameras came along things changed again - enabling more types of photos to be taken. The advancement in film technology was also key to these new capabilities. With the SLR, "in the camera composition" improved becuase the SLR was WYSIWYG (what you see is what you get) since what you were seeing was what the film would see when you triggered the shutter. With the earler Rollei (sp?) you weren't actually seeing exactly what the film would see - but rather a vantage point slightly above the lense.
As SLR techonology improved, several methods were developed to aid in focusing, so you didn't have to guess - or measure - the distance from lense to subject. And when "preview" was added to the SLR, you could push a button to open the apeture full open so you could see the "depth of field" of your lense. Before that you had to measure and use a look up table for your lense, or memorize the table. But you still had to take or guess at a light reading, the former requiring a separate light meter device.
Eventually technology came to the rescue again - building light meters right into SLRs. Not long after, "spot metering" was added to the SLRs' capabilities. In bright back lit situations, you didn't have to get a light meter reading by placing it very close to your subject. And, as before, film technology kept up with the advancements being made with the camera. Higher ASA/DIN films, with finer and finer grain, exteneded the capabilities of photography.
For photgraphing things that changes quickly - motor drives got added to the camera's capabilities, making Getting THE Shot much more likely than before.
Then there was the post camera requirements of film photography. There were ways of developing color film to compensate for using Outdoor Film with Indoor Lighting and visa versa. And to make prints from the developed negatives you had to be in a Dark Room, and work under red or "safe" lights, work with an enlarger and photo sensitive paper which required special chemicals to develop the print. And even when you had the developed print, you had to rinse all of the developer and "stop" off the paper - then dry the paper - flat - since paper once wet tends to curl as it dries.
If you wanted to make copies of a print you had to go through the whole "print, develop, rinse, dry and flatten process.
My father was a portrait photographer on the side, an accounty in his other life. I spent a lot of time on both sides of the lense, and even more time in the darkroom with him. That turned me off to still photography, until just before my son was born. Thankfully, camera and film technogology had come a long ways by the time I bought my Olympus OM1.
By the time my son was old enough to get into photography, still cameras and film had gotten even better and easier to use, and with affordable fish eye lenses, macro lenses and telephoto lenses, he could take the shots he wanted to take - without a lot of futzing and figuring. But he still had to rely on, and pay for, someone else to develop the film and print his images. NOW he has a Nikon Digital and several lenses for it. He can see a much large version of what the lense is seeing, in color - before he snaps the shutter - and then see, albeit in a small digital display, what the detectors in the camera actually got. If he has his laptop or iPad with him he can see a much larger version - in color. And when he selects the image files he likes, he doesn't have to have a darkroom to begin playing with the image data to get the look he wants. Instead he can open PhotoShop and tweek the image data until he gets exactly what he was after -and still keep the original image data intact.
Now some would feel that he SHOULD have spent months, years or decades learning the fundamentals of film photography and develop a thorough understanding of optics and film chemistry. But the fact of the matter is that he'd probably have lost interest in photography long before completing that apprenticeship program. And a lot of really nice images would never have been taken, and the memories that accompany them would likely have been lost.
Are there turners here, who, if they were photographers, aspire to be as good or better than Ansel Adams? Sure. Are there some who would be quite happy with Brownie box camera snap shot equivalents in their turning? Sure. Are there turners who if they were into photography would insist on owning and using a Hasselblad and still take photos a Brownie could have done? Sure.
The turning community is, thankfully, a Large Tent community, with room for all. If you want to scrape and sand - terrific. If you want to master the use of a particular turning tool - that's terrific. If you aspire to be a Master Turner, what ever THAT means, good on you guy.
Me, I just want to get ideas out of my head and into wood. If I find ways to do that more easily or quickly - NOW - I'm going to do that - if I can afford it - in time, patience and/or money. And the fact that the doing is part of the fun of turning is a bonus.
Will I ever be a recognized and highly respected turner? No. If I can make what I want to make, perhaps help some other turner with getting an idea out of his or her head into a turned piece of wood, or make things a little easier for another turner - that's good enough for me.
YOUR mileage may vary.