Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

More Brad Sells bowls

Posts

More Brad Sells bowls

#1

More Brad Sells bowls

john lucas

I've been shooting Brads sculptural pieces all morning. here are a couple of them. I post these because it shows what you can do with just plain old rotary carving tools. Other than a couple of specialty tools that Brad made or purchased most of what he does could be done with the typical rotary carving burrs many of us already have. It's his attention to detail that counts. He really pays attention to wall thickness and each piece has consistent thickness throughout. As you can see by the bottom photo these are pretty thin.




Re: More Brad Sells bowls

#2

Brad made a piece for me out. ....

JamieDonaldson

...of natural edge cork oak many years ago, and his rotary carving tools were chain saw and body grinder! I still marvel at his ability to make such uniformly thin walls, regardless of tools or materials involved.

Re: More Brad Sells bowls

#3

Re: More Brad Sells bowls

Dan Oliphant

John, the bowls are unquestionably outstanding, but your photography is a marval to behold.

Re: More Brad Sells bowls

#4

Re: More Brad Sells bowls

John Lucas

Thanks Dan but it could be better. I was the only one in the office today so I was running out of the studio to answer the phone or door all morning. When I have to do that I don't spend as much time playing with the lighting. I try to do easy lighting that doesn't take chances because it's faster. These shots were just for his web site and record. If I was doing them for juried shows or for publication I would try to take more time and do more dramatic lighting.

Re: More Brad Sells bowls

#5

Don Leydens

Re:  Brad made a piece for me out. ....

Don Leydens

What an outstanding piece(s). You did some job keeping the bowl thickness even. The tiny bowl really adds a lot for a little piece. Well done!

Re: More Brad Sells bowls

#6

Re: More Brad Sells bowls

Mike from St. Clair Shores

John, Thanks for sharing these incredible photographs. I feel that you are very lucky to be able to handle (touch & feel) these wonderful sculptures. Brad is very interesting in the journeys he takes to obtain the wonderful wood he uses. You sure keep it interesting also.

Mike

Re: More Brad Sells bowls

#7

Rob Wallace

Re: More Brad Sells bowls

Rob Wallace

John:

I agree that these pieces are outstanding, and as others have already said, your photography is excellent as usual.

My concern about the design of these bowls with the large volume and smaller attached volume is that, in the wrong hands, these bowls might be used for chips and dip! ;^)

Thanks for sharing these with us!

Rob

Re: More Brad Sells bowls

#8

Re: More Brad Sells bowls

john lucas

Can't say for sure but Brad probably feels like I do. If you buy it you can use it for what you want. Many years ago when he was doing craft shows a guy came up and looked at a fairly tall bowl that was priced around $300 if my memory is correct. He asked Brad if he could use that as a waste basket at his desk in his office. Brads response was similar to what I just said.