project from H#@%
john lucas
I started a project Saturday. It is a router plane using an Allen wrench for a blade. I wanted to both turn and carve the body of the plane. Well first I screwed up the thickness and made it too thin. I made an error in judgement and had to flatten more than I wanted with a hand plane. Then curved section of the bent allen wrench would not let it lock square at shallow depths partly because of where the blade lock had to be in the too thin wooden body.
I though I could correct it by milling away part of the back of the blade but screwed this up. I guess because of the heat in my shop I just wasn't thinking clear. There were several other minor errors.
Anyway late last night I started over by adding some thickness to the body, then returned some of it this morning before work. I'll go out there later tonight and work on the body some more.
I picked up another allen wrench today and will grind and sharpen it correctly this time. Maybe the whole thing will come together in the next few days. I hate it when a simply project goes haywire. I guess it's from trying to do too much in one day. On the plus side I did sell 2 tool and delivered them so I'm that much closer to my new sliding miter saw.



