Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Bradford Pear painted natural edge bowl

Posts

Bradford Pear painted natural edge bowl

#1

Bradford Pear painted natural edge bowl

John Lucas

The Bradford Pear that came down in my yard was so wet the bark will not stay on at all. It will almost fly off at high rpm's. consequently I just peel it off. The ends of this piece were chain sawn so I carved them to resemble the natural edge. Then I painted the edge a dark hunter black green and then sponge painted about 4 different colors of green with one of copper. The copper was a good touch. It adds depth.


Re: Bradford Pear painted natural edge bowl

#2

Re: Bradford Pear painted natural edge bowl

Ralph E Watts

John,

Nice work! Cool edge and I like crotches like this. Best regards, Ralph

Re: Bradford Pear painted natural edge bowl

#3

Re: Bradford Pear painted natural edge bowl

Mike from St. Clair Shores

Very nice John. I like what you did on the edge. How did you dry this piece? I am always worried about fruitwoods cracking etc., unless i let them dry over time.

Re: Bradford Pear painted natural edge bowl

#4

Re: Bradford Pear painted natural edge bowl

john lucas

I have had few problems with any wood when turned less than 3/8" thick. They warp of course. Bradford pear is one of those woods that you can leave the pith in without to many problems. I simply turned this to shape and let it dry. Then I mounted it on my vacuum chuck and returned the foot area so that it would be flat. On bowls that don't warp as much I just flatten the bottom with some sandpaper attached to my workbench.

I used the vacuum chuck to hold it and sand it and get rid of the wrinkle around the crotch figure.

Re: Bradford Pear painted natural edge bowl

#5

Outstanding!

Don Orr