Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT 35 mm slides to digital

Posts

OT 35 mm slides to digital

#1

OT 35 mm slides to digital

Emmett Manley, Lakeland, TN

From 1959 to the late 1990�s, I took thousands of Kodachrome slides. Now, I have 8,000 slides neatly labeled, organized, and in boxes where they... just sit. It is such a hassle to get out the old Kodak Carousel projector, set up a screen, etc., and I know when the bulb blows I probably will never find another one.

What is the best system out there for converting slides to digital? Please consider quality, ease of conversion, storage format/capacity, and expense.

Will I need a separate hard drive, or can my storage needs be met by computer memory, CD�s, memory chips, flash drives, or whatever?

Any help will be appreciated.

Re: OT 35 mm slides to digital

#2

Re: OT 35 mm slides to digital 

Ken Oakley-Sunny St. Cloud, Fla

You can have it done at WalMart and Walgreen Drugs. They can probably do it better and cheaper than you will be able to do it. I have put slides in small hand held viewers and then Put my camera on Macro, put lens against the viewr screen, taken a picture and uploaded it. A bit time consuming and depending on the condition of the slide the results were fair to good. but not great. here is an example.

Re: OT 35 mm slides to digital

#3

Re: OT 35 mm slides to digital

Scott Hurley in N VA

Several companies make converters that you can use to copy the slides and store them on a memory card. Once you're done just plug the memory card into your computer and copy the files. Prices range from $65 to $120, depending on the 'bells and whistles' you want. I know Best Buy carries them, and I believe Staples, Office Depot, and WalMart also have them. Again, it's time consuming, but if you have a lot of slides, it's probably cheaper than having WalMart do the conversion for you.

Re: OT 35 mm slides to digital

#4

Re: OT 35 mm slides to digital

Jeff Willaford

8,000 sllides involve a lot of time if done at home and a bit of money if done by a service. I have a small slide scanner but it's not up to that job. You might search the internet for 'slide scanning' or for 'slide scanners'.

It's always a good idea to review your slides with an eye towards thinning out the lot before you commit to anything. Just a thought.

Re: OT 35 mm slides to digital

#5

Re: OT 35 mm slides to digital

Emmett Manley, Lakeland, TN

Thanks for the quick feedback, plus a couple of suggestions provided via email.

I would need to reduce the 8,000 slides to perhaps 1,000 to make this project feasible and it may be that I will just have to take digital photographs of projected slides, and suffer considerable quality loss?

I thought that there were probably some dedicated digital scanners for such tasks, but that may not be the case. One suggestion I will check out is having Walgreen or Wal Mart do the conversion for me.

Re: OT 35 mm slides to digital

#6

There are several dedicated .........

JamieDonaldson

...slide scanners available, but a stand alone unit can start at about $70 and go up, some WAY up. For my purposes, I am scanning my old slides and negs with an ancient Epson flatbed scanner, which allows gang scans of slides, as well as serving for document scans. For a selection of what's available, check out bhphotovideo.com and search for slide scanners. If they don't have any photo related items available, you don't need it!

Re: OT 35 mm slides to digital

#7

Re: OT 35 mm slides to digital  *LINK*

Dinyar Chavda

These days, one of the first places I look for information, other than a specialized site, is Amazon. Search for "slide scanners" and look at the reviews (making sure that I'm not comparing two products, one of which has 5 ratings, while the other has 500). In your case, there was also a discussion of slide scanners in their forum that may address your needs.


http://www.amazon.com/forum/slide%20scanner/Tx34DE0TEBUD9?_encoding=UTF8&ref_=tag_stp_da_icdf_td

Re: OT 35 mm slides to digital

#8

Re: OT 35 mm slides to digital

Emmett Manley, Lakeland, TN

These scanner reviews were very informative and helpful. If I go the scanner route (rather than digitally photographing projected images) then it looks like it is just a matter of how much quality one wishes to purchase. For an electronic family photo album, I can compromise a bit on image quality.

Many thanks to those who responded both on this forum and via followup emails.

Re: OT 35 mm slides to digital

#9

i tried that. quality was not good

bob davis

Re: OT 35 mm slides to digital

#10

Re: OT 35 mm slides to digital

john lucas

Emmet I'm looking at the same thing but haven't gotten very far yet. 2 things come to mind for me. One is the time element. Every scanner I've seen so far that does quality work takes far to much time for me to scan 1000 slides.

Having someone else do it is simply not economical.

My boss suggested just photographing them with my digital camera. Although this is not perfect by a long shot it does allow you to save the photos with a very limited amount of time. If you ever needed them you would probably have to go in to a photo program and change the color and contrast to make them decent but our thought was I would only do this when I really need that photo.

Since most of mine are art slides without friends or family I've seriously though about just tossing them. I simply don't have any use for them anymore. I know that sounds course but other than personal enjoyment from the memories of shooting them I don't see a use for them.

Re: OT 35 mm slides to digital

#11

hey john,, OT 35 mm slides to digital

avalon

what i would do is buy a 35mm bellows unit, use a 50mm nikkor f2, with a reversal ring if i needed to crop...

how could this be done digitally? i have a manual focus 400 2.8 nikkor with a 1.5 extender, (600 mmf4) and i use it all the time with my D700... I know the fstop is stuck at 2.8, but for portraits, it's fine...

so can a lens be mounted on a bellows and still be used as a digital camera lens? even if it was stuck at 2.8, that should be fine for flat copy..

Re: OT 35 mm slides to digital

#12

Re: hey john,, OT 35 mm slides to digital

john lucas

Already got it. I've been shooting with a Nikon PB-6 bellows and have a 105 and 135 enlarging lens. For the light source I have 5000K 90 CRI FLD bulb. I think what I'm going to do is set the whole rig up near the TV and every commercial copy about 10 or 15. I can copy most of them in a week or two doing it this way. I'll Just leave it set up. Copying in Raw should give me enough leway to make any adjustments later on when I might want to use those images.

Re: OT 35 mm slides to digital

#13

Re: OT 35 mm slides to digital

keith zimmerman, Phoenix, AZ

I bought a dedicated film/slide scanner from Konica/Minolta. Unfortunately, shortly after I bought it, the company was bought and the entire line was terminated. I still use the scanner and have scanned my entire library of several thousand slides and film with it. The Dimage line of scanners should be available on ebay. I have the Dimage Dual IV. The driver that comes with it runs on Windows XP. I run Vista and 7 and use the program VueScan to do my scanning.

Before I found VusScan, I did some research into current scanners and actually decided on an Epson V600. It runs about $200 on Amazon, but can do film, slides, and prints.

http://www.amazon.com/Epson-Perfection-Photo-Scanner-B11B198011/dp/B002OEBMRU

Re: OT 35 mm slides to digital

#14

For anyone that has a Nikon digital .......

JamieDonaldson

..body, I will make them a deal for copying slides or negatives with this Nikon bellows with slide and negative copy attachment, with 2 lens reversing rings BR2 and BR3. I believe $75 including shipping would be a fair price, so make me an offer by email if interested..

Re: OT 35 mm slides to digital

#15

Richard Allen

Re: For anyone that has a Nikon digital .......

Richard Allen

Makes me wish I had slides to convert to digital.

Re: OT 35 mm slides to digital

#16

My method *LINK*

Bill Howatt

Below is link to thread and the setup I used - it is part of a previous thread on the same subject of copying slides.

I used a camera on macro.

I was going to use a regular scanner that does slides but it would have taken forever. I strongly suggest you fire up the projector one more time and critically cull your slides so you only do what you need - I threw out a lot of slides that were almost duplcates, had faded too much or were of some obscure scenery with no redeeming artistic merit that I could no longer identify.

Bill


Thread on same subject with my setup

Re: OT 35 mm slides to digital

#17

Re: My method

Emmett Manley, Lakeland, TN

Bill, this is a clever setup and some good advice. I happen to have that same camera and I will cull my slide collection severely before I begin digitalizing.

Thanks to everyone for great suggestions relative to the options available, advantages, disadvantages, time required, quality issues, and expense.

There is a lot of expertise lurking around this forum.

Re: OT 35 mm slides to digital

#18

Dennis in Southern Oregon

Re: OT 35 mm slides to digital (Long Response)

Dennis in Southern Oregon

As others have said, your best approach will depend on what equipment you already have and what quality of result you want. A couple of years ago I decided to scan 50-some 36-slide trays of 35 mm Kodachrome and Ektachrome slides, some of which were 40 years old. I wanted fairly good quality, because I wanted to pass them on to my children. I bought a Canon 8800F scanner for this purpose and was quite happy with the results. This scanner has auxiliary frames that will hold mounted 2x2 slides, 35 mm film strips and several other formats. (It also does all of the usual non-photo scanning functions.) This particular scanner has been superseded by the Canon 9700F (about $175).

The nice thing about this arrangement was that at the completion of each scan the images are opened in an image editor where you can make any necessary corrections before saving the images. In my case, many of the old slides, had faded a bit or had experienced color shift. The automatic correction feature of the editor turned out to be surprisingly effective in improving these slides.

The down side of trying to get good quality is that you have to spend a lot of time carefully cleaning each slide before scanning and sometimes still more time

editing the image to remove scratches and other imperfections. Plan on two or more minutes per slide.

Dennis

Re: OT 35 mm slides to digital

#19

Re: There are several dedicated ......... *LINK*

Jeffrey Schnell

I have a wolverine f2d 35mm File to Digital Scanner and it seems to work ok, but of course I thought I had more to do and still looking for them. It does both negatives and slides. Just pop them in, press a button then onto the next one. It copies them onto a SD Card and no computer needed at that point.


http://www.amazon.com/Wolverine-F2D300-Negatives-Digital-Converter/dp/B004I1K4TY

Re: OT 35 mm slides to digital

#20

Re: There are several dedicated ......... *LINK*

Mike from St. Clair Shores

After reading the initial thread, I got to thinking about all the slides and negatives I have stored away. So I started searching and ordered one from Ben's Outlet. Jeff if I had seen your post one day earlier I might have ordered the one you have. Anyway this one's on the way and if anyone is interested, I will give it a review after I get it and have a chance to try it out.


Vupoint slide/film converter

Re: OT 35 mm slides to digital

#21

Re: There are several dedicated .........

John Lucas

I looked at the reviews and it sounds like it doesn't do a good job of things like snow scenes or night scenes. I could not find how it converts negatives. Are they converted to a positive image? I'll be interested. The downside of shooting them on my camera with the bellows will be the negatives. Slides will be easy.