#3 on my ProEdge
keith zimmerman, Phoenix, AZ
Knowledge You Can Build On — Est. 1998
#3 on my ProEdge
keith zimmerman, Phoenix, AZ
Re: Sharpening a skew - Poll ???
David Walser
"Though I bought the Tormek "Skew Jig", I never got around to using it since it doesn't do curves."
Charlie,
Since you've got a system that works for you, I'll encourage you to stick with it. However, Tormek's skew jig (the SVS-50 - Multi Jig) DOES work with curves. Tormek calls these "radius skews" as oppose to "straight edge skews". The "formula" for a radius skew is printed on Tormek's Turning Tool Setter (TTS-100) and the instructions on how to produce this shape is found in Tormek's handbook.
Manuals? Who reads manuals?
charlie belden
Re: Sharpening a skew - Poll ???
Doug Turner
I place the end of the handle in the wolverine jig "V" and adjust the length of the arm until the bevel rest flush with the grinding wheel. The I turn the grinder on and barely touch the bevel to the wheel, adusting the length as needed until full contact with the bevel is achieved. Takes about 10 seconds on each side to achieve a uniform bevel on each side.
I hone with 600 grit diamond between grindings.
Manuals? Who reads manuals?
charlie belden