Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

PA cherry pot

Posts

PA cherry pot

#1

Ellis Walentine

PA cherry pot

Ellis Walentine

Here's the first piece off a cherry log that came down on our property recently. It's about 10 inches in diameter. I didn't agonize too much over the shape or the photography, but I thought the use of bark and sapwood as part of the composition was worth a snapshot.

Ellis


Re: PA cherry pot

#2

Very nicely done.

Greg Haugen

I do like the use of the sapwood and bark. Beautiful! Well Done.

Re: PA cherry pot

#3

Re: PA cherry pot

Jennifer Indy.USA

Ellis you are so good at making this form with this orientation of the wood. I am the extremely happy owner of one!

:)

Re: PA cherry pot

#4

Steven Antonucci

I never get that shape right.  But you do!

steven antonucci

Re: PA cherry pot

#5

Re: PA cherry pot

Joanne in Point Pleasant, PA

This is delightful! I love the little raccoon hiding behind the boulder in the center. At least, that's what I see.

Have I mentioned that finding pictures in the clouds on a blue-sky-cumulous day is one of my favorite activities?

Re: PA cherry pot

#6

Re: Its looking at me!

Steve Criscenzo

Nicely done Ellis. At first glance it appeared to be staring at me.

I like the shape and the bark effect. What did you use for a finish.

Re: PA cherry pot

#7

Sweet!

Don Orr

Re: PA cherry pot

#8

Ellis Walentine

Hmm... finish

Ellis Walentine

Now how did I finish that piece? As I recall, I wiped on a coat of Bulls-Eye French Polish, sanded it to 400, then wiped on two coats of Seal-A-Cel varnish. I let that harden up for a few days and then sanded again to 600 and hit it with a coat of Clapham's Salad Bowl Finish and buffed it out. I like the soft tactile feel that stuff gives, and it has held up well on other pieces.

All that sanding is necessary because the bark and sapwood areas fuzz up quite a bit and need to be sanded back.

Ellis

Re: PA cherry pot

#10

Dale Lenz

Re: PA cherry pot

Dale Lenz

Very nice, Ellis, Your going to make me hate myself for selling my Oliver lathe, needed the extra shop space for my Morso miter cutter.

Re: PA cherry pot

#11

Ellis Walentine

Thanks, all

Ellis Walentine

I really have no idea why I gravitate to recurved forms, and it's hard to articulate how I shape and proportion them. There's something I like about the way a recurved lip reaches up and out, sort of like a crown molding on a piece of furniture, weighted by the visual mass and volume of the vessel itself.

I'm looking forward to the instant gallery at the Symposium, which is always a really inspiring time for me.

Cheers,

Ellis

Re: PA cherry pot

#12

Re: PA cherry pot

George Van Beynen

Ellis, I guess one does not have to agonize too much over this shape when you have this form nailed as well as you do! Every accent works perfectly.

Re: PA cherry pot

#13

Barb Siddiqui

Very sweet pot, Ellis

Barb Siddiqui

Re: PA cherry pot

#14

Ellis Walentine

Thanks!

Ellis Walentine

Re: PA cherry pot

#15

Nice pot Ellis, and it will be interesting....

JamieDonaldson

...to watch if the pith area swells out into a football shape around the pith as some other woods do.

Re: PA cherry pot

#16

raccoon behind the boulder?

Jennifer Indy.USA

Joanne....I think you should stick to clouds.

:)

Re: PA cherry pot

#17

Hmmm

Joanne in Point Pleasant, PA

Well, it could be a little bear, wearing a Lone Ranger mask, behind the boulder. I'll have to take a closer look.