Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Quick video on correcting sharpening problems *LINK*

Posts

Quick video on correcting sharpening problems *LINK*

#1

Quick video on correcting sharpening problems *LINK*

john lucas

I threw this together last night. I don't have a clue how to work I movie so I didn't do any editing. Hope it makes sense and helps some of you. Any tips and suggestions are always welcome.


http://www.youtube.com/watch?v=M9G16ylEZHQ

Re: Quick video on correcting sharpening problems *LINK*

#2

Steven Antonucci

Good work on the bowl gouge...

steven antonucci

I start my course at Peters Valey talking about sharpening. When we get to the bowl gouge, thats the basic shape we're going for. I like to talk about it as a recipe- how far from the wheel, how much angle in the jig, and how much tool sticks out... and then someone sticks a bowl gouge in the spindle set-up and we get that profile!

S

Re: Quick video on correcting sharpening problems *LINK*

#3

Re: Quick video on correcting sharpening problems

Steve Criscenzo

Well done John. Your videos are concise and to the point. I like that. Who needs to edit when you get it right the first time. Thanks for sharing.

Steve

Re: Quick video on correcting sharpening problems *LINK*

#4

Re: Quick video on correcting sharpening problems

Richard Jones

Like Steve C said, why fix it if it's right? Great vid, clear, focused, well lit, scripted well, simple, enunciated.

Thanks.

Rich

Re: Quick video on correcting sharpening problems *LINK*

#5

Bill Blasic

Re: Quick video on correcting sharpening problems

Bill Blasic

John,

Very well done!

Bill

Re: Quick video on correcting sharpening problems *LINK*

#6

Dale Jablonski

Re: Quick video on correcting sharpening problems

Dale Jablonski

good job John.

Re: Quick video on correcting sharpening problems *LINK*

#7

Re: Quick video on correcting sharpening problems

Harry in Beautiful Downtown Kulpsville

John, what grit wheel were you using? It seemed to remove material more quickly than I am used to seeing.

Re: Quick video on correcting sharpening problems *LINK*

#8

Re: Quick video on correcting sharpening problems

John Lucas

It is 100 grit white aluminum oxide. It doesn't really take off metal that fast. the wings on this gouge are fairly thin. Still the nose was about 55 degrees and it removes it fast enough that you really need a light touch to keep from overgrinding. the trick is to use just enough pressure in just the right places. I've sharpened a lot of tools for club members and students and pretty much most of the steels sharpen fairly easily with 80 to 100 grit. totally reshaping a tool takes 36 grit or so.

I have a fairly course gray wheel but it won't remove metal on HSS as fast as the white wheels. It does hog off a lawn mower blade pretty quickly.

Re: Quick video on correcting sharpening problems *LINK*

#9

Re: Quick video, and now...

Carol Reed, Strawberry, AZ

Good one, John. I like your clear. concise methodology.

Now make one using it! I could use a reminder.

Re: Quick video on correcting sharpening problems *LINK*

#10

Re: Quick video on correcting sharpening problems

Bernie Weishapl

Great video John. Clear and to the point. Helps a lot.

Re: Quick video on correcting sharpening problems *LINK*

#11

Re: Quick video on correcting sharpening problems

Galen Vetterick

John

I could see the gouge was in a varigrind jig but some of your movement looked like you did not keep the jig tail anchored and was somwhat freehand. Did you always keep the jig anchored and it just looked freehand at times?

Now I just need to remember where to find the video so I can refer to it from time to time.

Thanks

Re: Quick video on correcting sharpening problems *LINK*

#12

Re: Quick video on correcting sharpening problems

John Lucas

I did keep it anchored. I tend to move around on the stone to keep it flat. I thought about that after watching the video, that maybe I should have kept everything centered.

Re: Quick video on correcting sharpening problems *LINK*

#13

Very Informative and Clear Explanation

Bill Howatt

Re: Quick video on correcting sharpening problems *LINK*

#14

Mike Stafford

You do good work, John!!!! Very helpful!

Mike Stafford