Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Turn A Straight PinWith A Parting Tool video *LINK*

Posts

Turn A Straight PinWith A Parting Tool video *LINK*

#1

Turn A Straight PinWith A Parting Tool video *LINK*

charlie belden

Been working on "How Many Angels . . .(will fit on the head of a pin?)" and posted some pictures of attempts at turning a straight pin for the piece.

I've put together a How To YouTube video and a web page on How To. There's a link in the accompanying text to the web page on turning to small diameters - with a parting tool.

Comments, questions and suggestions welcomed.


YouTube - Turning small

Re: Turn A Straight PinWith A Parting Tool video *LINK*

#2

Re: Turn A Straight PinWith A Parting Tool video

Harry in Beautiful Downtown Kulpsville

There is not much difference between that type of parting tool and a bedan. Both are sharpened straight across and have a single level. Jean-Francois Escoulen is a master with the bedan. He uses it with the beveled side facing up.

Re: Turn A Straight PinWith A Parting Tool video *LINK*

#3

Re: Turn A Straight PinWith A Parting Tool video

john lucas

Charlie That's pretty much exactly how I turn conductors baton except I start with a dowel that will fit through my headstock. I turn about 3/8" at a time and then loosen the chuck and move it out so I can turn another 3/8". I made a special hollow cone for my tailstock to support the loose end withought really touching it so that end won't flex and start whipping. I make them about 10 to 12" long and 1/4" or less in diameter.