Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Do you turn with a face shield?

Posts

Re: Do you turn with a face shield?

#26

Re: Airstream almost always

Steve Criscenzo

Shortly after starting to turn about six years ago I saw Bill Grumbine at a vendor demonstration booth. He was using an Airstream. Bill took the time to explain the advantages. I got one shortly after and I have not regretted it for a minute. I wear it at all times except for the smallest work.

It never fogs, keeps me cooler, and I focus more on my work because I do not need to worry about being hit in the face. Plus my lungs are protected as well.

The tear away covers make keeping it clean very easy. It was a boatload of money but worth every bit of it to me.

Re: Do you turn with a face shield?

#27

Most always

Jeff Willaford

Most always when turning or coring. UVEX Bionic shield anti fog. If it gets dirty I clean it. I wear safety glasses also and try to be aware of where I'm standing.

Re: Do you turn with a face shield?

#28

About 80% of the time

Barbara Gill

Always when roughing and then when re-turning a roughed out. When I get to the finishing I usually don't.

Re: Do you turn with a face shield?

#29

Betty Scarpino

Re: Do you turn with a face shield?

Betty Scarpino

In my own shop, yes, almost all of the time when turning. I also wear a faceshield when using most power equipment, even a Dremel. The exception is when using a drill press with a sanding pad in it. Then I don't wear my faceshield.

I try to wear one when using a grinder, but am probably not as faithful with that as I ought to be. Grinders can be even more dangerous than a lathe.

When demonstrating, I try to wear a faceshield, but that's not always possible or practical.

Hearing protection is important to me, too, so I wear earplugs, always.

Re: Do you turn with a face shield?

#30

Re: Do you turn with a face shield?

Allen Howell

I use the Uvex wraparound shield with anti-fog window anytime I'm turning. Have had a couple of pieces explode on me and hit the shield as well as last week had a large piece of bark try to give me a black eye. Glad I had it on. I have never had problems with it fogging up, and cleaning is easy when it needs it. I only use safety glasses and mask when sanding/finishing, though.

Re: Do you turn with a face shield?

#31

Barb Siddiqui

Yes. 98% of the time.

Barb Siddiqui

Re: Do you turn with a face shield?

#32

Re: Do you turn with a face shield?

Dick Wilson

If the lathe is turning I have a face shield on. Yes, it is a pain in the a_ _ with the fogging/dust/vision, etc. and all BUT........I have shattered two face shields when turnings exploded. One was while I was sanding. It hurt like hell but no marks. I picked up one of pieces that shattered the face shield just below my eye and it had no flat spots. All very sharp edges. Hate to think what damage it would have done it it had hit me in the eye/cheek area.

Re: Do you turn with a face shield?

#33

Re: Do you turn with a face shield?

DickL in Tampa

Well said. Works for me.

Re: Do you turn with a face shield?

#34

Re: Do you turn with a face shield?

Frank Ford

99.99999% of time when I'm turning. The first time I "used" my $20 polycarbonate face shield, it saved me from a broken nose or lost and eye. It's cheap insurance.

You must keep it clean. I wear glasses underneath mine and have no problem seeing through it.

Frank

Re: Do you turn with a face shield?

#35

1

Colin

Trend Airshield all the time

Re: Do you turn with a face shield?

#36

Bill Blasic

Re: 1

Bill Blasic

I'm category 1, 99.9%. Currently the Uvex but moving soon to the Trend Pro.

Bill

Re: Do you turn with a face shield?

#37

I Also Use the Uvex

Barbara Gill

Thanks to Carole's advice I bought one. Sometimes I forget it is on.

Re: Do you turn with a face shield?

#38

Re: Do you turn with a face shield?

Keith E. Burns

I don't post here often however this thread caught my attention. I have always worn a faceshield only when roughing then off it came. Only within the last year have I started wearing safety glasses all the time. One of our club members who is a very passionate, experienced and safety minded turner is in intensive care, unconsious, on a respirator with a fractured skull and a damaged eye from a bowl exploding. This happened a week ago.

Sure it had to be a freak accident and it could never happen to you. Well it does happen. I'm going to do my best to "turn safe" from now on.

Re: Do you turn with a face shield?

#39

Dale Jablonski

Re: Do you turn with a face shield?

Dale Jablonski

I always use my face shield. Let's face it, when you're a kid, we get hurt because we don't know any better. The risks are still there and why pick up any more baggage then you have to? I'd rather turn then heal anyday!

Re: Do you turn with a face shield?

#40

Re: Do you turn with a face shield?

Philip Duffy

All the time, except when I am working on a pen and wearing protection glasses.

Re: Do you turn with a face shield?

#41

Don Leydens

Re: Do you turn with a face shield?

Don Leydens

I use it when roughing and shaping. Had a huge chunk fly off 2 weeks ago and hit me right in the face...shield. Glad I had it on.

Re: Do you turn with a face shield?

#42

ebd

never

ebd

Re: Do you turn with a face shield?

#43

Re: I Also Use the Uvex - Question?

Stuart Johnson

Can you wear glasses and a dusk mask comfortably with the Uvex?

Re: Do you turn with a face shield?

#44

Always and Line of Fire Varies.

Bill Howatt

Always means anytime the lathe spindle is turning with a workpiece on it. It also means that I'm wearing either my Triton hard-hat/face-shield/hearing protection/positve pressure rig mainly for roughing or a full-face shield with a dust respirator underneath it.

Lyle Jamieson is right about the line of fire not always being the line of fire. The worst incident I had was an object coming out of chuck and it somehow hit the ceiling light fixture above the lathe and then my head. What else it might have bounced off is unknown, it happened so fast.

Bill

Re: Do you turn with a face shield?

#45

Re: I Also Use the Uvex - Question?

Don Evans

Stuart, YES, it is adjustable for near or far from the face. Never seen another shield that would do that. You should even be able to wear it with goggles at the far setting.

Some said they forget, try to find a place on the lathe to hang it so it must be removed to run the lathe, that way you have it in hand and may as well put it on at that moment.

I have mine hanging on the control box (one that swings) on the Oneway 2436, Ideal place for it.

I wear mine all the time except for sanding and very small things like finials. This particular shield has chose of anti fog shield also, I use that one, never have used other one available so cannot make a comparison but mine never fogs but my shop is climate controlled which makes a big difference.

Love the shape of it.......

Don

Re: Do you turn with a face shield?

#46

Re: I Also Use the Uvex - Question?

Jeff Willaford

No problems wearing my glasses and a North half mask respirator with filters under my UVEX.

Re: Do you turn with a face shield?

#47

Re: Do you turn with a face shield?

Barry L Elder

I wear a face shield, but turn with gouges.

Re: Do you turn with a face shield?

#48

Mike Stafford

Don, is your face shield opaque?

Mike Stafford

If so wear it more often.... :b :D

I am glad you were not hurt.

Re: Do you turn with a face shield?

#49

Re: Do you turn with a face shield?

Barry

I seldom wear a face shield, although I know I should. I do wear a hard hat when I am rough turning large pieces. I have a problem seeing when I have a face shield on. Perhaps, being able to see better helps to offset the risk. (I know, flimsy excuse!) I turn on a Stubby 750 and try to stand out of the line of fire as much as possible. I don't wear a dust mask unless I am sanding.

Re: Do you turn with a face shield?

#50

Brad Vietje

#2:  Sometimes -- always with bark or cracks

Brad Vietje