Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Yet another woodturning accident *LINK*

Posts

Yet another woodturning accident *LINK*

#1

Chuck Jones - West TN

Yet another woodturning accident *LINK*

Chuck Jones - West TN

Another woodturner's very sad misfortune can be yet another reminder for all of us who use power tools, even the relatively safe lathe. Keith Burns is posting updates on the accident a member of the Mid-South Woodturners Guild had last week. You can review these posts at www.woodturnersamerica.com - Forums -Turning Forum - Safety Alert (My apologies for posting a link to another forum, but that's better than me trying to recap the circumstances here).

I have met this lady and watched her turn. She is a very experienced, talented, and cautious turner. It's hard to imagine how such an accident occurred.


http://woodturnersamerica.com/forum/index.php?f=4&t=539&rb_v=viewtopic

Re: Yet another woodturning accident *LINK*

#2

Re: Yet another woodturning accident

George Guadiane

This is, of course awful.

I hope she makes a complete recovery, and soon.

I was LUCKY, a few years ago, working on a SMALL piece on a mini lathe, I had it fly apart and hit the lens of my street glasses. The wire bridge twisted up and opened a nice gash in my unibrow.

I WAS LUCKY. There was a big long bark inclusion that I was not informed enough about. I didn't realize the danger. Without those eye glasses, I would likely have been blinded in at least one eye.

It's not quite Religion, but I wear a face shield. I rarely use the expansion mode for clamping and never to do final turning. Just enough to get a clamp mode tenon. Not that a face shield could defend against a large piece of wood, but it might be the difference between a headache and a hospitalization.

Again, I hope and pray that she makes a full recovery, and I hope we are able to learn the details of the accident so that we can add it to our knowledge base and avoid a repeat.

Re: Yet another woodturning accident *LINK*

#3

Walt Bennett

Re: Yet another woodturning accident

Walt Bennett

While really a sad event, working with a naturally created medium like wood can and will occasionally lead to unexpected, unanticipated events just like this. We turners could all dress up in bomb squad suits and then there'd only be the accidents caused by catching gloves in spinning chucks, etc. There is no way to completely make yourself immune from accidents - all one can do is take precautions to minimize them. Overall, turning is apparently much safer than driving a car in heavy traffic on a freeway/interstate, so then we should all remember to fasten our safety belts.

Re: Yet another woodturning accident *LINK*

#4

Re: Yet another woodturning accident

David Walser

Walt,

I don't think anyone would disagree with what you say, but they MIGHT disagree with the application of what you said. Just what is a "reasonable" precaution to take? Which safety precautions are reasonable is, like beauty, in the eye of the beholder. In my shop, unless the piece is under 1" in diameter, a face shield is mandatory. (I just bought two new face shields because I'll be teaching a couple of neighbor kids how to turn this summer.) Safety glasses are always mandatory. I know turners who consider face shields to be optional. That's fine -- in their shops, but not in mine.

Having said that, I'm sure there are some things I routinely do that violate some other turner's mandatory safety rules. If that's the case, I'd appreciate knowing why the other turner has adopted that rule. I might learn something and adopt the rule myself.