Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Wood ID query

Posts

Re: Wood ID query

#26

Ellis Walentine

Re: Wood ID query *LINK*

Ellis Walentine

I'll guess that it's Lati (Amphimas pterocarpoides), sometimes called Bokanga, from the Congo, because of the wenge-like toothed grain pattern and the color. Lati is sometimes known as white wenge. It doesn't look to me like anything domestic.

I've never turned Lati (or whatever it actually is that you're showing us). It would be interesting to see your finished turnings. That grain is very dramatic looking.

Ellis


Lati

Re: Wood ID query

#28

Re: Wood ID query

Charles Watson

Looks like some Angelheart that I have.

Re: Wood ID query

#29

Re: Wood ID query

Rob Cohen

I'm thinking that Ellis might be correct. There is also a very good chance that this Is

Iroko. I forwarded this to a few rare wood and veneer guys I know and that's what they think

based on the pattern in the end grain, which is a very accurate way to ID,

Rob

Re: Wood ID query

#30

Ellis on the right track

Rob Cohen

I think Ellis could be right about the Lati, but the end grain(which is often the best ID)

says IROKO. Couldn't post the link, so you'll have to copy and paste

http://www.hobbithouseinc.com/personal/woodpics/iroko/iroko%206%20end%20grain%20closeup%20s50%20q60%20plh.htm

Re: Wood ID query

#31

Brad Vietje

My 2 Cents...

Brad Vietje

First, its nothing I've ever used, so I don't know.

Second, I'd say its a tropical species, as there is no distinct early/late growth ring pattern, so it grows where the seasons are very different than here in the northern temperate forests. While this species shows end grain zig-zags like the various Elms, a flecking pattern like Sycamore, and color like O.O., I don't any of them is all that close.

Clearly I don't know what it is, but I'm pretty sure what it isn't.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Wood ID query

#32

Ellis Walentine

Wish I could be sure

Ellis Walentine

The iroko I've worked doesn't have that sawtooth pattern on the side grain which is so reminiscent of wenge. Iroko is a more homogenous light brown-brown color without the light-dark orange contrast and zig-zag pattern. It is generally nondescript looking, grainwise, and often sold as a substitute for teak.

I'll see if I can get another knowledgeable pair of eyes on this...

Ellis

Re: Wood ID query

#33

Iroko is not yellow

Jorge Casta�eda

I have worked with it and what I used is dark. I may have a piece left. If found I'll post.

Re: Wood ID query

#34

Iroko 

Jorge Casta�eda

Here is a picture the color is slightly lighter but otherwise very close to the wood.

As you see neither color or grain is a match.

Re: Wood ID query

#35

Iroko continued

Rob Cohen

I mentioned Iroko because of some research I did. Although it is usually brown, I did on rare

occasions see it in a light yellow color when I was managing a veneer company.

It can also figure similar to the sample. In the photos there is one shot matching color

and two others showing very similar grain. I guess ultimately We will never know for

sure without sending an end slice to Wisconsin. Thanks to hobbithouse.com for photos

It's been intriguing trying to figure this out. Rob


img