Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Turned Knobs for Nightstand Drawers

Posts

Turned Knobs for Nightstand Drawers

#1

Turned Knobs for Nightstand Drawers

Todd Nebel

I'm in the process of building this little table for my youngest daughter and yesterday I turned the drawer knobs out of the wood scraps from the drawer front. The finish on the table will be a clear gloss poly. So, I thought why not try the same finish I use on my pens for the knobs - CA glue. I think it "turned" out nice. I did have to part off the excess glue shown in the pic below. I was also thinking how fortunate I am to be able to use the same wood and make items like knobs for the furniture I make.




Todd

Re: Turned Knobs for Nightstand Drawers

#2

Jim in Burlington Ont.

Re: Turned Knobs for Nightstand Drawers

Jim in River Oaks, Ont.

Very nicely done Todd,

I think once you learn how to make your own pulls as you have, using wood from the project itself or of significance allows you to make the finished piece of furniture even more personal.

I have been doing this myself for some time.

One other method I use to attach them is to drill a through hole and then split the tenon.

I do that on the bandsaw with a small cutting jig



Then the inside face is trimmed flush


Take care,

Jim

Re: Turned Knobs for Nightstand Drawers

#3

Re: Turned Knobs for Nightstand Drawers

Todd Nebel

Hi Jim,

That is the same method I use to install the drawer knobs. I like your sled cradle for the bandsaw, safe and accurate. I will have to build me one. Thanks.

Re: Turned Knobs for Nightstand Drawers

#4

Re: Turned Knobs for Nightstand Drawers

roger lance

Todd....switching up from QSWO to cherry....you're working with two of my favorite woods....and doing a great job on both !!

Re: Turned Knobs for Nightstand Drawers

#5

Re: Turned Knobs for Nightstand Drawers

Mike Rubes, Apex, NC

Hi Jim,

I like that idea a lot. Do you use any sort of wedge into the split or just glue it in? It sort of looks like a wedge in there, but I cannot tell for sure.

Either way, I like that idea and love the look.

Thanks,

Mike

Snow and sleet this morning, blue skys and sun this afternoon in Apex, NC!!

Re: Turned Knobs for Nightstand Drawers

#6

Jim in Burlington Ont.

Re: Turned Knobs for Nightstand Drawers

Jim in River Oaks, Ont.

Hi Mike,

Yes, I use a wedge, and I orient the wedge so it will not be parallel to the long grain of the drawer face, they can split the wood... :D but I learnt that one awhile ago.

Take care,

Jim

Re: Turned Knobs for Nightstand Drawers

#7

Re: Turned Knobs for Nightstand Drawers

Todd Nebel

Hi Roger,

Yes, I've been doing a lot of projects out of QSWO up to now. It's a nice change to work with a different wood. This table is actually soft maple, not cherry. I visited a new lumber supplier a couple weeks back. This place carries soft and hard maple, curly maple, and even curly cherry along with all the typical suspects. My local sawyer just doesn't get any maple logs and highly figured stock is hit or miss, mostly miss.